SUN HYDRAULICS
DNCAMJN

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCAMJN (DNCAMJN) is a solenoid-operated, 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool design. This valve is engineered with a closed transition between positions, significantly reducing oil loss during shifting\u2014especially beneficial in pilot control circuits. It operates with port 3 as the inlet and port 1 as the tank; while reverse flow is possible, it is not recommended due to potential performance degradation. The solenoid tube assembly is fatigue rated for service up to 5000 psi (350 bar), ensuring durability under high-pressure conditions. This direct-actuated valve does not require minimum hydraulic pressure for operation and uses EPDM seals for compatibility with phosphate ester fluids, avoiding exposure to petroleum-based substances which could damage the seals. The DNCAMJN employs a wet armature design where the working fluid encases the armature and absorbs heat from the coil, which may affect certain fluids like water-glycol mixtures over time. Offering various coil termination and voltage options\u2014with or without surge protection\u2014the solenoid's magnetic design enhances efficiency by providing high spool actuating force per watt expended. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted bidirectionally on the tube. With IP69K-rated coil connector options available, additional weatherized coils and kits offer comprehensive environmental protection. This valve incorporates Sun's floating style construction to minimize internal part binding due to excessive installation torque or cavity/cartridge machining variations. It fits cavity T-31A, belongs to Series 1, has an 8 gpm (30 L/min) capacity, and supports a maximum operating pressure of 5000 psi (350 bar). The typical response time is approximately 50 ms with a maximum leakage of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). The valve allows a switching frequency of up to 15,000 cycles per hour and features manual override capabilities requiring minimal force.