SUN HYDRAULICS
DNCAMSV614
$145.74 USD
- SUN HYDRAULICS
- Material:DNCAMSV614
- Model:DNCA-MSV@614
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCAMSV614 (DNCAMSV614) is a solenoid-operated, 4-way, 2-position cartridge valve designed for precise directional control in hydraulic systems. This direct-acting, balanced spool directional valve features a closed transition between positions, which minimizes oil loss during shifting\u2014an essential characteristic for pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank; however, reverse flow is possible though not recommended due to potential performance discrepancies. The solenoid tube assembly is fatigue rated for high-pressure applications up to 5000 psi (350 bar), ensuring durability and reliability. This valve requires no minimum hydraulic pressure for operation and utilizes a wet armature design, where the working fluid surrounds the armature. This design helps dissipate heat generated by the coil but may affect fluids like water-glycol mixtures over time due to heat exposure. A variety of coil termination and voltage options are available, allowing customization for specific applications. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. The DNCAMSV614 incorporates Sun's floating style construction to reduce the risk of internal parts binding from excessive installation torque or cavity-cartridge machining variations. It has a capacity of 8 gpm (30 L/min) with a typical response time of 50 ms and supports up to 15,000 cycles per hour switching frequency. The maximum valve leakage at standard conditions is minimal at 10 in\u00b3/min (160 cc/min). For manual operation, an override force requirement of approximately 5 lbs/1000 psi is needed at port 1 with a stroke length of .10 inches (2.5 mm). Seal kits are available in Viton material for both cartridge and coil components, ensuring compatibility with various fluid types while maintaining sealing integrity under different operating conditions.
The Sun Hydraulics DNCAMSV614 (DNCAMSV614) is a solenoid-operated, 4-way, 2-position cartridge valve designed for precise directional control in hydraulic systems. This direct-acting, balanced spool directional valve features a closed transition between positions, which minimizes oil loss during shifting\u2014an essential characteristic for pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank; however, reverse flow is possible though not recommended due to potential performance discrepancies. The solenoid tube assembly is fatigue rated for high-pressure applications up to 5000 psi (350 bar), ensuring durability and reliability. This valve requires no minimum hydraulic pressure for operation and utilizes a wet armature design, where the working fluid surrounds the armature. This design helps dissipate heat generated by the coil but may affect fluids like water-glycol mixtures over time due to heat exposure. A variety of coil termination and voltage options are available, allowing customization for specific applications. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. The DNCAMSV614 incorporates Sun's floating style construction to reduce the risk of internal parts binding from excessive installation torque or cavity-cartridge machining variations. It has a capacity of 8 gpm (30 L/min) with a typical response time of 50 ms and supports up to 15,000 cycles per hour switching frequency. The maximum valve leakage at standard conditions is minimal at 10 in\u00b3/min (160 cc/min). For manual operation, an override force requirement of approximately 5 lbs/1000 psi is needed at port 1 with a stroke length of .10 inches (2.5 mm). Seal kits are available in Viton material for both cartridge and coil components, ensuring compatibility with various fluid types while maintaining sealing integrity under different operating conditions.
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ