SUN HYDRAULICS
DNCAMXN2E24V

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCAMXN2E24V (DNCAMXN2E24V) is a solenoid-operated, 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool directional design. This valve excels in applications where minimizing oil loss during position transitions is critical, such as in pilot control circuits. Designed with a closed transition, it significantly reduces oil loss when shifting positions. It operates optimally with port 3 as the inlet and port 1 as the tank; reverse flow is possible but not recommended for guaranteed performance. The solenoid tube assembly is fatigue rated for up to 5000 psi (350 bar), ensuring durability under high-pressure conditions. Notably, this valve does not require minimum hydraulic pressure for operation due to its direct actuation. The valve incorporates EPDM seals suitable for systems using phosphate ester fluids; however, exposure to petroleum-based fluids can damage these seals. Featuring a wet armature design, the working fluid cools the armature but may degrade over time if fluids like water-glycol mixtures are used continuously at high temperatures. The solenoid's magnetic design offers high efficiency and reliable shifting by maximizing spool actuating force per watt expended. With various coil termination and voltage options available\u2014including those with surge protection\u2014and interchangeable coils compatible with other Sun Series 1 solenoid products, this model provides flexibility in installation and application. Coil connector options offer protection ratings up to IP69K, and additional weatherized coils are available for enhanced environmental protection. The valve's floating style construction minimizes the risk of internal binding due to installation torque or machining variations. It has an operating capacity of 8 gpm (30 L/min), a maximum leakage rate of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), and supports switching frequencies up to 15,000 cycles per hour.