SUN HYDRAULICS
DNCAMXN636
$136.81 USD
- SUN HYDRAULICS
- Material:DNCAMXN636
- Model:DNCA-MXN@636
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCAMXN636 (DNCAMXN636) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control with a closed transition. This feature significantly reduces oil loss during shifting, which is crucial in pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank; while reverse flow is possible, it is not recommended due to potential performance issues. Constructed to withstand fatigue at pressures up to 5000 psi (350 bar), this valve does not require minimum hydraulic pressure for operation. Cartridges with EPDM seals are suitable for systems using phosphate ester fluids but should avoid petroleum-based fluids to prevent seal damage. The valve employs a wet armature design, allowing the working fluid to surround the armature and absorb heat generated by the coil. This design consideration is particularly important when using fluids like water-glycol mixtures that may degrade at high temperatures over time. A variety of coil termination and voltage options are available, enhancing versatility and reliability in different environments. The unique magnetic design of the solenoid ensures high efficiency and reliable spool actuation force per watt expended. Interchangeable with other Sun Series 1 solenoid products, coils can be mounted in either direction on the tube. Coil connector options offer protection ratings up to IP69K for enhanced environmental resilience. The floating style construction minimizes internal part binding risks due to excessive installation torque or machining variations within the cavity or cartridge. With a capacity of 8 gpm (30 L/min), a typical response time of 50 ms, and a maximum operating pressure of 5000 psi (350 bar), this valve offers robust performance for demanding applications. Its compact dimensions include a solenoid tube diameter of .75 inches (19 mm) and an installation torque range of 30-35 lbf-ft (41-47 Nm).
The Sun Hydraulics DNCAMXN636 (DNCAMXN636) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control with a closed transition. This feature significantly reduces oil loss during shifting, which is crucial in pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank; while reverse flow is possible, it is not recommended due to potential performance issues. Constructed to withstand fatigue at pressures up to 5000 psi (350 bar), this valve does not require minimum hydraulic pressure for operation. Cartridges with EPDM seals are suitable for systems using phosphate ester fluids but should avoid petroleum-based fluids to prevent seal damage. The valve employs a wet armature design, allowing the working fluid to surround the armature and absorb heat generated by the coil. This design consideration is particularly important when using fluids like water-glycol mixtures that may degrade at high temperatures over time. A variety of coil termination and voltage options are available, enhancing versatility and reliability in different environments. The unique magnetic design of the solenoid ensures high efficiency and reliable spool actuation force per watt expended. Interchangeable with other Sun Series 1 solenoid products, coils can be mounted in either direction on the tube. Coil connector options offer protection ratings up to IP69K for enhanced environmental resilience. The floating style construction minimizes internal part binding risks due to excessive installation torque or machining variations within the cavity or cartridge. With a capacity of 8 gpm (30 L/min), a typical response time of 50 ms, and a maximum operating pressure of 5000 psi (350 bar), this valve offers robust performance for demanding applications. Its compact dimensions include a solenoid tube diameter of .75 inches (19 mm) and an installation torque range of 30-35 lbf-ft (41-47 Nm).
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ