SUN HYDRAULICS
DNCAMXV2E24V
$340.04 USD
- SUN HYDRAULICS
- Material:DNCAMXV2E24V
- Model:DNCA-MXV@2E24V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCAMXV2E24V (DNCAMXV2E24V) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. It features a closed transition between positions to minimize oil loss during shifting, making it particularly effective in pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank; although reverse flow is possible, it is not recommended due to potential performance issues. Engineered for robust performance, this valve operates at pressures up to 5000 psi (350 bar) without requiring minimum hydraulic pressure. It incorporates EPDM seals suited for phosphate ester fluid systems and should not be exposed to petroleum-based substances. The wet armature design allows the working fluid to cool the coil but may cause some fluids like water-glycol mixtures to degrade under prolonged energization. Offering high efficiency through its unique magnetic design, the solenoid provides substantial actuating force per watt, ensuring reliable valve operation. The DNCAMXV2E24V accommodates various coil termination and voltage configurations, including options with surge protection and IP69K-rated connectors for enhanced environmental resilience. Interchangeable coils with other Sun Series 1 products add versatility in installation directionality. Constructed with Sun's floating style technique, this valve reduces internal binding risks from excessive torque or machining variations. The valve fits into a T-31A cavity and supports a flow capacity of up to 8 gpm (30 L/min). It demonstrates a typical response time of 50 ms and can handle switching frequencies up to 15,000 cycles per hour. Manual override requires a force of approximately 5 lbs/1000 psi at Port 1 with a stroke length of .10 inches (2.5 mm). The solenoid tube diameter measures .75 inches (19 mm), while the hex size is .78 inches (22.2 mm), necessitating an installation torque between 30\u201335 lbf ft (41\u201347 Nm). This model weighs approximately .60 lb (.30 kg).
The Sun Hydraulics DNCAMXV2E24V (DNCAMXV2E24V) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. It features a closed transition between positions to minimize oil loss during shifting, making it particularly effective in pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank; although reverse flow is possible, it is not recommended due to potential performance issues. Engineered for robust performance, this valve operates at pressures up to 5000 psi (350 bar) without requiring minimum hydraulic pressure. It incorporates EPDM seals suited for phosphate ester fluid systems and should not be exposed to petroleum-based substances. The wet armature design allows the working fluid to cool the coil but may cause some fluids like water-glycol mixtures to degrade under prolonged energization. Offering high efficiency through its unique magnetic design, the solenoid provides substantial actuating force per watt, ensuring reliable valve operation. The DNCAMXV2E24V accommodates various coil termination and voltage configurations, including options with surge protection and IP69K-rated connectors for enhanced environmental resilience. Interchangeable coils with other Sun Series 1 products add versatility in installation directionality. Constructed with Sun's floating style technique, this valve reduces internal binding risks from excessive torque or machining variations. The valve fits into a T-31A cavity and supports a flow capacity of up to 8 gpm (30 L/min). It demonstrates a typical response time of 50 ms and can handle switching frequencies up to 15,000 cycles per hour. Manual override requires a force of approximately 5 lbs/1000 psi at Port 1 with a stroke length of .10 inches (2.5 mm). The solenoid tube diameter measures .75 inches (19 mm), while the hex size is .78 inches (22.2 mm), necessitating an installation torque between 30\u201335 lbf ft (41\u201347 Nm). This model weighs approximately .60 lb (.30 kg).
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ