SUN HYDRAULICS
DNCATAV214
$181.28 USD
- SUN HYDRAULICS
- Material:DNCATAV214
- Model:DNCA-TAV@214
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCATAV214 (DNCATAV214) is a solenoid-operated, 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool design. This valve is engineered with a closed transition between positions, significantly minimizing oil loss during shifts, which is crucial for pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank, although reverse flow is possible but not recommended due to potential performance issues. The solenoid tube assembly is fatigue-rated for service up to 5000 psi (350 bar), ensuring durability under demanding conditions. This cartridge valve operates without requiring minimum hydraulic pressure, making it versatile for various applications. Equipped with EPDM seals, the DNCATAV214 is suitable for systems utilizing phosphate ester fluids; however, exposure to petroleum-based fluids can damage these seals. The valve employs a wet armature design where the working fluid surrounds the armature and absorbs heat generated by the coil\u2014a consideration when using certain fluids like water-glycol mixtures that may degrade over time at elevated temperatures. Offering flexibility in configuration, this model supports various coil termination and voltage options, including surge protection features. The high-efficiency solenoid design delivers robust spool actuating force per watt expended, ensuring reliable operation. Coils are interchangeable within Sun's Series 1 solenoid products and can be mounted in either direction on the tube. For enhanced environmental protection, coil connector options are available with ratings up to IP69K. This model incorporates Sun's floating style construction to prevent internal part binding due to excessive installation torque or machining variations in cavity/cartridge interfaces. With a capacity of 8 gpm (30 L/min) and a maximum operating pressure of 5000 psi (350 bar), this valve meets demanding requirements with responsive operation within approximately 50 milliseconds and minimal leakage rates at specified conditions.
The Sun Hydraulics DNCATAV214 (DNCATAV214) is a solenoid-operated, 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool design. This valve is engineered with a closed transition between positions, significantly minimizing oil loss during shifts, which is crucial for pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank, although reverse flow is possible but not recommended due to potential performance issues. The solenoid tube assembly is fatigue-rated for service up to 5000 psi (350 bar), ensuring durability under demanding conditions. This cartridge valve operates without requiring minimum hydraulic pressure, making it versatile for various applications. Equipped with EPDM seals, the DNCATAV214 is suitable for systems utilizing phosphate ester fluids; however, exposure to petroleum-based fluids can damage these seals. The valve employs a wet armature design where the working fluid surrounds the armature and absorbs heat generated by the coil\u2014a consideration when using certain fluids like water-glycol mixtures that may degrade over time at elevated temperatures. Offering flexibility in configuration, this model supports various coil termination and voltage options, including surge protection features. The high-efficiency solenoid design delivers robust spool actuating force per watt expended, ensuring reliable operation. Coils are interchangeable within Sun's Series 1 solenoid products and can be mounted in either direction on the tube. For enhanced environmental protection, coil connector options are available with ratings up to IP69K. This model incorporates Sun's floating style construction to prevent internal part binding due to excessive installation torque or machining variations in cavity/cartridge interfaces. With a capacity of 8 gpm (30 L/min) and a maximum operating pressure of 5000 psi (350 bar), this valve meets demanding requirements with responsive operation within approximately 50 milliseconds and minimal leakage rates at specified conditions.
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ