SUN HYDRAULICS
DNCATCN848
$173.34 USD
- SUN HYDRAULICS
- Material:DNCATCN848
- Model:DNCA-TCN@848
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCATCN848 (DNCATCN848) is a solenoid-operated, 4-way, 2-position direct-acting cartridge valve featuring a balanced spool directional design with closed transition. This design minimizes oil loss during shifting, making it particularly beneficial for pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank, although reverse flow is possible but not recommended due to performance considerations. Engineered for durability, the solenoid tube assembly is rated for fatigue at 5000 psi (350 bar), and the valve operates without requiring minimum hydraulic pressure. It includes EPDM seals suitable for phosphate ester fluids but caution against petroleum-based fluids to prevent seal damage. The DNCATCN848 employs a wet armature design where working fluid surrounds the armature, impacting heat dissipation when the coil is energized for extended periods. This can affect certain fluids like water-glycol mixtures over time due to varnish formation. The solenoid's magnetic design ensures high efficiency with substantial actuating force per watt expended, enhancing reliable valve shifting. Coils are interchangeable with other Sun Series 1 solenoid products and can be installed in either direction, providing versatility in application. This cartridge integrates Sun's floating style construction to reduce internal binding risks from excessive installation torque or machining variations. It supports a wide range of coil termination and voltage options with ratings up to IP69K for enhanced environmental protection. The valve has a capacity of 8 gpm (30 L/min) and a maximum operating pressure of 5000 psi (350 bar). Its rapid response time is typically around 50 ms, with leakage rates capped at 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). The DNCATCN848 also features manual override capabilities requiring minimal force and stroke distance for ease of use in various applications.
The Sun Hydraulics DNCATCN848 (DNCATCN848) is a solenoid-operated, 4-way, 2-position direct-acting cartridge valve featuring a balanced spool directional design with closed transition. This design minimizes oil loss during shifting, making it particularly beneficial for pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank, although reverse flow is possible but not recommended due to performance considerations. Engineered for durability, the solenoid tube assembly is rated for fatigue at 5000 psi (350 bar), and the valve operates without requiring minimum hydraulic pressure. It includes EPDM seals suitable for phosphate ester fluids but caution against petroleum-based fluids to prevent seal damage. The DNCATCN848 employs a wet armature design where working fluid surrounds the armature, impacting heat dissipation when the coil is energized for extended periods. This can affect certain fluids like water-glycol mixtures over time due to varnish formation. The solenoid's magnetic design ensures high efficiency with substantial actuating force per watt expended, enhancing reliable valve shifting. Coils are interchangeable with other Sun Series 1 solenoid products and can be installed in either direction, providing versatility in application. This cartridge integrates Sun's floating style construction to reduce internal binding risks from excessive installation torque or machining variations. It supports a wide range of coil termination and voltage options with ratings up to IP69K for enhanced environmental protection. The valve has a capacity of 8 gpm (30 L/min) and a maximum operating pressure of 5000 psi (350 bar). Its rapid response time is typically around 50 ms, with leakage rates capped at 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). The DNCATCN848 also features manual override capabilities requiring minimal force and stroke distance for ease of use in various applications.
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ