SUN HYDRAULICS
DNCATCV528
$179.00 USD
- SUN HYDRAULICS
- Material:DNCATCV528
- Model:DNCA-TCV@528
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCATCV528 (DNCATCV528) is a solenoid-operated, 4-way, 2-position cartridge valve designed for precision in pilot control circuits. This direct-acting, balanced spool directional valve features a closed transition between positions to minimize oil loss during shifting. It is engineered for use with port 3 as the inlet and port 1 as the tank, although reverse flow is possible, it is not recommended due to performance concerns. The solenoid tube assembly is rated for fatigue at 5000 psi (350 bar), ensuring robust service life without requiring minimum hydraulic pressure for operation. The valve incorporates EPDM seals suitable for systems using phosphate ester fluids; however, these seals are incompatible with petroleum-based products. Featuring a wet armature design, this valve exposes the working fluid to coil-generated heat, which may affect certain fluids over time. The DNCATCV528 offers a variety of coil termination and voltage options, some including surge protection. Its high-efficiency magnetic design provides substantial spool actuating force per watt expended, ensuring reliable operation. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. Coil connector options provide protection ratings up to IP69K for enhanced environmental resilience. This cartridge incorporates Sun's floating style construction to mitigate internal binding risks due to installation torque or machining variations. It fits into T-31A cavities and supports a capacity of 8 gpm (30 L/min) at a maximum operating pressure of 5000 psi (350 bar). Typical response time is around 50 ms with maximum leakage at specified conditions being minimal. The manual override requires a force of approximately 5 lbs/1000 psi with an override stroke of .10 inches (2.5 mm). The valve weighs approximately .60 lb (.30 kg) and utilizes Viton seal kits for both cartridge and coil applications.
The Sun Hydraulics DNCATCV528 (DNCATCV528) is a solenoid-operated, 4-way, 2-position cartridge valve designed for precision in pilot control circuits. This direct-acting, balanced spool directional valve features a closed transition between positions to minimize oil loss during shifting. It is engineered for use with port 3 as the inlet and port 1 as the tank, although reverse flow is possible, it is not recommended due to performance concerns. The solenoid tube assembly is rated for fatigue at 5000 psi (350 bar), ensuring robust service life without requiring minimum hydraulic pressure for operation. The valve incorporates EPDM seals suitable for systems using phosphate ester fluids; however, these seals are incompatible with petroleum-based products. Featuring a wet armature design, this valve exposes the working fluid to coil-generated heat, which may affect certain fluids over time. The DNCATCV528 offers a variety of coil termination and voltage options, some including surge protection. Its high-efficiency magnetic design provides substantial spool actuating force per watt expended, ensuring reliable operation. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. Coil connector options provide protection ratings up to IP69K for enhanced environmental resilience. This cartridge incorporates Sun's floating style construction to mitigate internal binding risks due to installation torque or machining variations. It fits into T-31A cavities and supports a capacity of 8 gpm (30 L/min) at a maximum operating pressure of 5000 psi (350 bar). Typical response time is around 50 ms with maximum leakage at specified conditions being minimal. The manual override requires a force of approximately 5 lbs/1000 psi with an override stroke of .10 inches (2.5 mm). The valve weighs approximately .60 lb (.30 kg) and utilizes Viton seal kits for both cartridge and coil applications.
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ