SUN HYDRAULICS
DNCATJV2E24V

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCATJV2E24V (DNCATJV2E24V) is a solenoid-operated, 4-way, 2-position cartridge valve designed for precise directional control in hydraulic systems. This direct-acting, balanced spool directional valve features a closed transition between positions, significantly minimizing oil loss during shifting. This characteristic is particularly advantageous in pilot control circuits where oil conservation is critical. The valve's optimal performance is achieved with port 3 as the inlet and port 1 as the tank, although reverse flow is possible but not recommended due to potential performance degradation. The solenoid tube assembly of this model is fatigue rated for high-pressure applications up to 5000 psi (350 bar), ensuring durability and reliability under demanding conditions. The DNCATJV2E24V operates without the need for minimum hydraulic pressure, thanks to its direct actuation mechanism. It incorporates EPDM seals suitable for systems using phosphate ester fluids; however, these seals are incompatible with petroleum-based substances. The wet armature design allows the working fluid to surround the armature, which can be exposed to heat generated by the coil\u2014important to consider if the coil remains energized over long durations. Users can choose from various coil termination and voltage options, with or without surge protection, enhancing versatility for different applications. The high-efficiency solenoid design ensures robust spool actuation force per watt used, contributing to reliable valve operation. Coils are interchangeable within Sun Series 1 solenoid products and can be mounted in either direction on the tube. The valve's construction minimizes internal binding risks due to excessive installation torque or machining variations. It supports a capacity of up to 8 gpm (30 L/min) and offers a rapid response time of approximately 50 ms. With a maximum leakage rate of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), it maintains efficiency even under frequent switching conditions of up to 15,000 cycles per hour.