SUN HYDRAULICS
DNCATLN648
$166.59 USD
- SUN HYDRAULICS
- Material:DNCATLN648
- Model:DNCA-TLN@648
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCATLN648 (DNCATLN648) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve features a closed transition between positions, significantly minimizing oil loss during shifting, which is particularly beneficial in pilot control circuits. The capacity of this valve is optimized with port 3 as the inlet and port 1 as the tank; while reverse flow is possible, it is not recommended due to potential performance inconsistencies. The solenoid tube assembly is fatigue-rated for service pressures up to 5000 psi (350 bar), ensuring durability and reliability under demanding conditions. This direct-actuated valve does not require minimum hydraulic pressure for operation and utilizes a wet armature design where the working fluid surrounds the armature. This design helps manage heat generated by the coil but requires careful consideration when using fluids prone to thermal breakdown, such as water-glycol mixtures. The DNCATLN648 offers various coil termination and voltage options, with or without surge protection. Its high-efficiency magnetic design delivers robust spool actuating force per watt, enhancing reliable valve shifting. The interchangeable coils are compatible with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. Coil connector options are rated up to IP69K for superior environmental protection, with additional weatherized coils and kits available. The valve incorporates Sun\u2019s floating style construction to reduce internal part binding due to installation torque or machining variations. Key specifications include a capacity of 8 gpm (30 L/min), response time of approximately 50 ms, maximum leakage at 110 SUS (24 cSt) of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), switching frequency of up to 15000 cycles/hour, manual override force requirement of 5 lbs/1000 psi at Port 1 (33 N/100 bar), override stroke of .10 inches (2.5 mm), solenoid tube diameter of .75 inches (19 mm), valve hex size of .78 inches (22.2 mm), installation torque between 30-35 lbf ft (41-47 Nm), and model weight of .60 lb (.30 kg).
The Sun Hydraulics DNCATLN648 (DNCATLN648) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve features a closed transition between positions, significantly minimizing oil loss during shifting, which is particularly beneficial in pilot control circuits. The capacity of this valve is optimized with port 3 as the inlet and port 1 as the tank; while reverse flow is possible, it is not recommended due to potential performance inconsistencies. The solenoid tube assembly is fatigue-rated for service pressures up to 5000 psi (350 bar), ensuring durability and reliability under demanding conditions. This direct-actuated valve does not require minimum hydraulic pressure for operation and utilizes a wet armature design where the working fluid surrounds the armature. This design helps manage heat generated by the coil but requires careful consideration when using fluids prone to thermal breakdown, such as water-glycol mixtures. The DNCATLN648 offers various coil termination and voltage options, with or without surge protection. Its high-efficiency magnetic design delivers robust spool actuating force per watt, enhancing reliable valve shifting. The interchangeable coils are compatible with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. Coil connector options are rated up to IP69K for superior environmental protection, with additional weatherized coils and kits available. The valve incorporates Sun\u2019s floating style construction to reduce internal part binding due to installation torque or machining variations. Key specifications include a capacity of 8 gpm (30 L/min), response time of approximately 50 ms, maximum leakage at 110 SUS (24 cSt) of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), switching frequency of up to 15000 cycles/hour, manual override force requirement of 5 lbs/1000 psi at Port 1 (33 N/100 bar), override stroke of .10 inches (2.5 mm), solenoid tube diameter of .75 inches (19 mm), valve hex size of .78 inches (22.2 mm), installation torque between 30-35 lbf ft (41-47 Nm), and model weight of .60 lb (.30 kg).
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ