SUN HYDRAULICS
DNDAMUN924
$228.45 USD
- SUN HYDRAULICS
- Material:DNDAMUN924
- Model:DNDA-MUN@924
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDAMUN924 (DNDAMUN924) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve does not require minimum hydraulic pressure for operation and features a fatigue-rated solenoid tube assembly that can withstand up to 5000 psi (350 bar). It incorporates a wet armature design, which allows the working fluid to surround the armature and manage heat generated by the coil. However, this could potentially affect fluids like water-glycol mixtures that may degrade at high temperatures over time. The valve supports various manual override options but note that these are not compatible with weatherized coils. For models with D or L control, the detent mechanism in the manual override is intended for temporary use and has a mechanical life expectancy of about 7,000 cycles. This versatile valve offers multiple coil termination and voltage options, some with surge protection. Its high-efficiency solenoid design ensures reliable valve shifting by maximizing spool actuating force per watt expended. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. Coil connector options provide ratings up to IP69K for enhanced environmental protection. The valve incorporates Sun's floating style construction to minimize internal part binding due to excessive installation torque or machining variations in cavity/cartridge configurations. With a capacity of 10 gpm (40 L/min) and maximum operating pressure of 5000 psi (350 bar), it offers a typical response time of 50 ms and supports switching frequencies up to 15,000 cycles per hour. The cartridge is compatible with EPDM seals for systems using phosphate ester fluids but should avoid petroleum-based fluids to prevent seal damage.
The Sun Hydraulics DNDAMUN924 (DNDAMUN924) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve does not require minimum hydraulic pressure for operation and features a fatigue-rated solenoid tube assembly that can withstand up to 5000 psi (350 bar). It incorporates a wet armature design, which allows the working fluid to surround the armature and manage heat generated by the coil. However, this could potentially affect fluids like water-glycol mixtures that may degrade at high temperatures over time. The valve supports various manual override options but note that these are not compatible with weatherized coils. For models with D or L control, the detent mechanism in the manual override is intended for temporary use and has a mechanical life expectancy of about 7,000 cycles. This versatile valve offers multiple coil termination and voltage options, some with surge protection. Its high-efficiency solenoid design ensures reliable valve shifting by maximizing spool actuating force per watt expended. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. Coil connector options provide ratings up to IP69K for enhanced environmental protection. The valve incorporates Sun's floating style construction to minimize internal part binding due to excessive installation torque or machining variations in cavity/cartridge configurations. With a capacity of 10 gpm (40 L/min) and maximum operating pressure of 5000 psi (350 bar), it offers a typical response time of 50 ms and supports switching frequencies up to 15,000 cycles per hour. The cartridge is compatible with EPDM seals for systems using phosphate ester fluids but should avoid petroleum-based fluids to prevent seal damage.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ