SUN HYDRAULICS
DNDAMXE248
$574.23 USD
- SUN HYDRAULICS
- Material:DNDAMXE248
- Model:DNDA-MXE@248
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDAMXE248 (DNDAMXE248) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve is built to handle high-pressure applications with its solenoid tube assembly rated for fatigue at 5000 psi (350 bar). It operates without the need for minimum hydraulic pressure and offers various manual override options, though manual overrides are not compatible with weatherized coils. The D, L, and T manual control assemblies provide temporary actuation with a mechanical life expectancy of about 7,000 cycles. Cartridges using EPDM seals are suitable for systems utilizing phosphate ester fluids but can be damaged by petroleum-based fluids. The wet armature design allows the working fluid to cool the armature but may cause issues if the coil remains energized for extended periods, especially in water-glycol mixtures. This model features a high-efficiency solenoid that ensures reliable shifting by maximizing spool actuating force per watt expended. The valve accommodates interchangeable coils from Sun Series 1 products and can be mounted in either direction. Coil options include ratings up to IP69K for enhanced environmental protection. The design incorporates Sun's floating style construction to minimize binding risks due to installation torque or machining variations. With a cavity size of T-31A and a flow capacity of 10 gpm (40 L/min), this valve supports a maximum operating pressure of 5000 psi (350 bar) and typical response time of 50 ms. It has low leakage rates and is capable of switching at frequencies up to 15,000 cycles per hour. Additional specifications include a solenoid tube diameter of .75 inches (19 mm), hex size of .78 inches (22.2 mm), installation torque between 30-35 lbf ft (41-47 Nm), and a weight of .60 lb (.30 kg).
The Sun Hydraulics DNDAMXE248 (DNDAMXE248) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve is built to handle high-pressure applications with its solenoid tube assembly rated for fatigue at 5000 psi (350 bar). It operates without the need for minimum hydraulic pressure and offers various manual override options, though manual overrides are not compatible with weatherized coils. The D, L, and T manual control assemblies provide temporary actuation with a mechanical life expectancy of about 7,000 cycles. Cartridges using EPDM seals are suitable for systems utilizing phosphate ester fluids but can be damaged by petroleum-based fluids. The wet armature design allows the working fluid to cool the armature but may cause issues if the coil remains energized for extended periods, especially in water-glycol mixtures. This model features a high-efficiency solenoid that ensures reliable shifting by maximizing spool actuating force per watt expended. The valve accommodates interchangeable coils from Sun Series 1 products and can be mounted in either direction. Coil options include ratings up to IP69K for enhanced environmental protection. The design incorporates Sun's floating style construction to minimize binding risks due to installation torque or machining variations. With a cavity size of T-31A and a flow capacity of 10 gpm (40 L/min), this valve supports a maximum operating pressure of 5000 psi (350 bar) and typical response time of 50 ms. It has low leakage rates and is capable of switching at frequencies up to 15,000 cycles per hour. Additional specifications include a solenoid tube diameter of .75 inches (19 mm), hex size of .78 inches (22.2 mm), installation torque between 30-35 lbf ft (41-47 Nm), and a weight of .60 lb (.30 kg).
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ