SUN HYDRAULICS
DNDAMYE
$543.96 USD
- SUN HYDRAULICS
- Material:DNDAMYE
- Model:DNDA-MYE
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDAMYE (DNDAMYE) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve is fatigue-rated for service up to 5000 psi (350 bar) and operates without requiring any minimum hydraulic pressure. It offers several manual override options, though these are not compatible with weatherized coils. The D and L control models feature a detent mechanism in the manual override suitable for temporary actuation, with a mechanical life expectancy of approximately 7,000 cycles. The valve is equipped with EPDM seals, making it compatible with systems using phosphate ester fluids while being unsuitable for petroleum-based fluids. The design incorporates a wet armature, which allows the working fluid to surround the armature and manage heat generated by the coil. This feature requires consideration when using fluids like water-glycol mixtures that may degrade over time due to heat exposure. Various coil termination and voltage options are available, including those with surge protection capabilities. The solenoid's magnetic design ensures high efficiency by providing significant spool actuating force per watt, enhancing reliable valve operation. The DNDAMYE valve utilizes Sun's floating style construction to reduce internal part binding risks from installation torque or machining variations. It fits into a T-31A cavity and belongs to Series 1 with a flow capacity of 10 gpm (40 L/min). The typical response time is 50 ms, and it can switch at frequencies up to 15,000 cycles per hour. The manual override requires a force of 5 lbs/1000 psi at Port 1 and features a stroke length of .10 inches (2.5 mm). The valve has a hex size of .78 inches (22.2 mm) and an installation torque requirement between 30 - 35 lbf-ft (41 - 47 Nm).
The Sun Hydraulics DNDAMYE (DNDAMYE) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve is fatigue-rated for service up to 5000 psi (350 bar) and operates without requiring any minimum hydraulic pressure. It offers several manual override options, though these are not compatible with weatherized coils. The D and L control models feature a detent mechanism in the manual override suitable for temporary actuation, with a mechanical life expectancy of approximately 7,000 cycles. The valve is equipped with EPDM seals, making it compatible with systems using phosphate ester fluids while being unsuitable for petroleum-based fluids. The design incorporates a wet armature, which allows the working fluid to surround the armature and manage heat generated by the coil. This feature requires consideration when using fluids like water-glycol mixtures that may degrade over time due to heat exposure. Various coil termination and voltage options are available, including those with surge protection capabilities. The solenoid's magnetic design ensures high efficiency by providing significant spool actuating force per watt, enhancing reliable valve operation. The DNDAMYE valve utilizes Sun's floating style construction to reduce internal part binding risks from installation torque or machining variations. It fits into a T-31A cavity and belongs to Series 1 with a flow capacity of 10 gpm (40 L/min). The typical response time is 50 ms, and it can switch at frequencies up to 15,000 cycles per hour. The manual override requires a force of 5 lbs/1000 psi at Port 1 and features a stroke length of .10 inches (2.5 mm). The valve has a hex size of .78 inches (22.2 mm) and an installation torque requirement between 30 - 35 lbf-ft (41 - 47 Nm).
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ