SUN HYDRAULICS
DNDAMYE2E12V
$767.73 USD
- SUN HYDRAULICS
- Material:DNDAMYE2E12V
- Model:DNDA-MYE@2E12V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDAMYE2E12V (DNDAMYE2E12V) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. It features a solenoid tube assembly rated for fatigue at 5000 psi (350 bar), allowing it to operate without the need for minimum hydraulic pressure. The valve offers multiple manual override options, although compatibility with weatherized coils is limited. Equipped with a wet armature design, the coil's heat is managed by the surrounding working fluid; however, this may affect fluids like water-glycol mixtures over time. The valve supports a variety of coil terminations and voltages, including options with surge protection. Its high-efficiency solenoid ensures reliable valve shifting by delivering strong spool actuating force per watt consumed. Coils are interchangeable within the Sun Series 1 solenoid products and can be installed in either direction on the tube. The DNDAMYE2E12V incorporates Sun's floating style construction to reduce internal part binding risks due to excessive installation torque or machining variations. With a cavity size of T31A and Series 1 designation, it has a capacity of 10 gpm (40 L/min) and can handle maximum operating pressures of up to 5000 psi (350 bar). Typical response time is approximately 50 ms, while maximum valve leakage at 110 SUS (24 cSt) is around 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). The valve can switch up to 15,000 cycles per hour and requires a manual override force of about 5 lbs/1000 psi for Port 1. It has a manual override stroke length of .10 inches (2.5 mm), solenoid tube diameter of .75 inches (19 mm), and an installation torque range of 30-35 lbf ft (41-47 Nm). The model weighs approximately .60 lb (.30 kg) and utilizes Viton seal kits for both cartridge and coil components.
The Sun Hydraulics DNDAMYE2E12V (DNDAMYE2E12V) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. It features a solenoid tube assembly rated for fatigue at 5000 psi (350 bar), allowing it to operate without the need for minimum hydraulic pressure. The valve offers multiple manual override options, although compatibility with weatherized coils is limited. Equipped with a wet armature design, the coil's heat is managed by the surrounding working fluid; however, this may affect fluids like water-glycol mixtures over time. The valve supports a variety of coil terminations and voltages, including options with surge protection. Its high-efficiency solenoid ensures reliable valve shifting by delivering strong spool actuating force per watt consumed. Coils are interchangeable within the Sun Series 1 solenoid products and can be installed in either direction on the tube. The DNDAMYE2E12V incorporates Sun's floating style construction to reduce internal part binding risks due to excessive installation torque or machining variations. With a cavity size of T31A and Series 1 designation, it has a capacity of 10 gpm (40 L/min) and can handle maximum operating pressures of up to 5000 psi (350 bar). Typical response time is approximately 50 ms, while maximum valve leakage at 110 SUS (24 cSt) is around 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). The valve can switch up to 15,000 cycles per hour and requires a manual override force of about 5 lbs/1000 psi for Port 1. It has a manual override stroke length of .10 inches (2.5 mm), solenoid tube diameter of .75 inches (19 mm), and an installation torque range of 30-35 lbf ft (41-47 Nm). The model weighs approximately .60 lb (.30 kg) and utilizes Viton seal kits for both cartridge and coil components.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ