SUN HYDRAULICS
DNDAMYE936
$581.88 USD
- SUN HYDRAULICS
- Material:DNDAMYE936
- Model:DNDA-MYE@936
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDAMYE936 (DNDAMYE936) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This versatile valve is engineered with a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar), ensuring robust performance in demanding applications. The valve operates without the need for minimum hydraulic pressure and offers various manual override options, although these are not compatible with weatherized coils. Models with D or L control feature a detent mechanism intended for temporary actuation, boasting a mechanical life expectancy of approximately 7,000 cycles. The cartridge is equipped with EPDM seals suitable for systems utilizing phosphate ester fluids, while caution is advised against exposure to petroleum-based substances that could damage the seals. Its wet armature design immerses the armature in working fluid, which can be affected by prolonged coil energization and heat exposure\u2014particularly in water-glycol mixtures. It features diverse coil termination and voltage options with interchangeable coils compatible across Sun Series 1 products. This model incorporates Sun's floating style construction to mitigate internal part binding due to installation torque or machining variations. With a capacity of 10 gpm (40 L/min), it offers rapid response times of approximately 50 ms and supports high switching frequencies up to 15,000 cycles per hour. The valve's maximum leakage rate at 110 SUS (24 cSt) is limited to 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). Installation requires a torque range of 30-35 lbf ft (41-47 Nm), and it fits into T-31A cavities with a hex size of .78 inches (22.2 mm). The DNDAMYE936 weighs .60 lb (.30 kg) and uses Viton seal kits for both cartridge and coil components.
The Sun Hydraulics DNDAMYE936 (DNDAMYE936) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This versatile valve is engineered with a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar), ensuring robust performance in demanding applications. The valve operates without the need for minimum hydraulic pressure and offers various manual override options, although these are not compatible with weatherized coils. Models with D or L control feature a detent mechanism intended for temporary actuation, boasting a mechanical life expectancy of approximately 7,000 cycles. The cartridge is equipped with EPDM seals suitable for systems utilizing phosphate ester fluids, while caution is advised against exposure to petroleum-based substances that could damage the seals. Its wet armature design immerses the armature in working fluid, which can be affected by prolonged coil energization and heat exposure\u2014particularly in water-glycol mixtures. It features diverse coil termination and voltage options with interchangeable coils compatible across Sun Series 1 products. This model incorporates Sun's floating style construction to mitigate internal part binding due to installation torque or machining variations. With a capacity of 10 gpm (40 L/min), it offers rapid response times of approximately 50 ms and supports high switching frequencies up to 15,000 cycles per hour. The valve's maximum leakage rate at 110 SUS (24 cSt) is limited to 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). Installation requires a torque range of 30-35 lbf ft (41-47 Nm), and it fits into T-31A cavities with a hex size of .78 inches (22.2 mm). The DNDAMYE936 weighs .60 lb (.30 kg) and uses Viton seal kits for both cartridge and coil components.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ