SUN HYDRAULICS
DNDAMYV814N
$238.57 USD
- SUN HYDRAULICS
- Material:DNDAMYV814N
- Model:DNDA-MYV@814N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDAMYV814N (DNDAMYV814N) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting and balanced spool directional control. This valve is engineered to handle up to 5000 psi (350 bar) service pressure with a fatigue-rated solenoid tube assembly. It operates efficiently without requiring any minimum hydraulic pressure and offers multiple manual override options, though these are not compatible with weatherized coils. Notably, models with D or L control feature a detent mechanism in the manual override for temporary actuation, supporting an approximate mechanical life of 7,000 cycles. The valve's design incorporates a wet armature, allowing the working fluid to surround the armature and manage heat generated by the coil. This feature is crucial for systems using fluids like water-glycol mixtures that may degrade over time due to heat exposure. A variety of coil termination and voltage options are available, including those with surge protection. The solenoid's magnetic design ensures high efficiency with significant spool actuating force per Watt expended, enhancing reliable valve shifting. This model uses Sun's floating style construction to reduce the risk of internal parts binding from excessive installation torque or machining variations. It fits into cavity T-31A and belongs to Series 1, offering a capacity of 10 gpm (40 L/min). With a typical response time of 50 ms and maximum valve leakage at 110 SUS (24 cSt) of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), it supports a switching frequency of up to 15,000 cycles per hour. The manual override requires a force of approximately 5 lbs/1000 psi (33 N/100 bar) at Port 1 and has an override stroke of .10 inches (2.5 mm). The valve installation torque ranges from 30-35 lbf ft (41-47 Nm), and it weighs around .60 lb (.30 kg).
The Sun Hydraulics DNDAMYV814N (DNDAMYV814N) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting and balanced spool directional control. This valve is engineered to handle up to 5000 psi (350 bar) service pressure with a fatigue-rated solenoid tube assembly. It operates efficiently without requiring any minimum hydraulic pressure and offers multiple manual override options, though these are not compatible with weatherized coils. Notably, models with D or L control feature a detent mechanism in the manual override for temporary actuation, supporting an approximate mechanical life of 7,000 cycles. The valve's design incorporates a wet armature, allowing the working fluid to surround the armature and manage heat generated by the coil. This feature is crucial for systems using fluids like water-glycol mixtures that may degrade over time due to heat exposure. A variety of coil termination and voltage options are available, including those with surge protection. The solenoid's magnetic design ensures high efficiency with significant spool actuating force per Watt expended, enhancing reliable valve shifting. This model uses Sun's floating style construction to reduce the risk of internal parts binding from excessive installation torque or machining variations. It fits into cavity T-31A and belongs to Series 1, offering a capacity of 10 gpm (40 L/min). With a typical response time of 50 ms and maximum valve leakage at 110 SUS (24 cSt) of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), it supports a switching frequency of up to 15,000 cycles per hour. The manual override requires a force of approximately 5 lbs/1000 psi (33 N/100 bar) at Port 1 and has an override stroke of .10 inches (2.5 mm). The valve installation torque ranges from 30-35 lbf ft (41-47 Nm), and it weighs around .60 lb (.30 kg).
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ