SUN HYDRAULICS
DNDAMZN224
$220.90 USD
- SUN HYDRAULICS
- Material:DNDAMZN224
- Model:DNDA-MZN@224
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDAMZN224 (DNDAMZN224) is a solenoid-operated, 4-way, 2-position cartridge valve characterized by its direct-acting, balanced spool directional design. This model is engineered to operate at a fatigue-rated pressure of up to 5000 psi (350 bar) without the need for minimum hydraulic pressure. It offers several manual override options, though some configurations are incompatible with weatherized coils. The manual control assembly has an estimated mechanical life of approximately 7,000 cycles. Notably, cartridges with EPDM seals are designed for systems using phosphate ester fluids and should not be exposed to petroleum-based substances. The valve features a wet armature design that enhances efficiency but may affect fluid stability if the coil is energized for extended periods. A variety of coil termination and voltage options are available, including versions with surge protection. Coils are interchangeable within Sun Series 1 solenoid products and can be mounted in either orientation on the tube. Connector options provide up to IP69K protection ratings for enhanced environmental resilience. The DNDAMZN224 incorporates Sun's floating style construction to reduce internal binding risks due to installation torque or machining variations. It fits into a T-31A cavity and has a capacity of 10 gpm (40 L/min). The valve exhibits a typical response time of 50 ms and maintains maximum leakage at 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). Capable of switching frequencies up to 15,000 cycles per hour, the manual override requires minimal force for operation. The valve has a hex size of 7/8 inch (22.2 mm) and an installation torque range between 30-35 lbf ft (41-47 Nm). Weighing approximately .60 lb (.30 kg), it is compatible with Viton seal kits for both cartridge and coil applications.
The Sun Hydraulics DNDAMZN224 (DNDAMZN224) is a solenoid-operated, 4-way, 2-position cartridge valve characterized by its direct-acting, balanced spool directional design. This model is engineered to operate at a fatigue-rated pressure of up to 5000 psi (350 bar) without the need for minimum hydraulic pressure. It offers several manual override options, though some configurations are incompatible with weatherized coils. The manual control assembly has an estimated mechanical life of approximately 7,000 cycles. Notably, cartridges with EPDM seals are designed for systems using phosphate ester fluids and should not be exposed to petroleum-based substances. The valve features a wet armature design that enhances efficiency but may affect fluid stability if the coil is energized for extended periods. A variety of coil termination and voltage options are available, including versions with surge protection. Coils are interchangeable within Sun Series 1 solenoid products and can be mounted in either orientation on the tube. Connector options provide up to IP69K protection ratings for enhanced environmental resilience. The DNDAMZN224 incorporates Sun's floating style construction to reduce internal binding risks due to installation torque or machining variations. It fits into a T-31A cavity and has a capacity of 10 gpm (40 L/min). The valve exhibits a typical response time of 50 ms and maintains maximum leakage at 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). Capable of switching frequencies up to 15,000 cycles per hour, the manual override requires minimal force for operation. The valve has a hex size of 7/8 inch (22.2 mm) and an installation torque range between 30-35 lbf ft (41-47 Nm). Weighing approximately .60 lb (.30 kg), it is compatible with Viton seal kits for both cartridge and coil applications.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ