SUN HYDRAULICS
DNDASEV298
$222.79 USD
- SUN HYDRAULICS
- Material:DNDASEV298
- Model:DNDA-SEV@298
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDASEV298 (DNDASEV298) is a solenoid-operated, 4-way, 2-position cartridge valve designed with a direct-acting, balanced spool and a soft shift feature to minimize system shock during valve actuation. This feature makes it suitable for applications where reduced hydraulic shock is desired, although it is not recommended for situations requiring precise timing control. The valve offers typical response times between 150 ms and 300 ms, influenced by factors such as flow rate, pressure, coil voltage, oil viscosity, and ambient temperature. It includes a push-type manual override control but is incompatible with weatherized coils when manual override functionality is required. The solenoid tube assembly is rated for fatigue at 5000 psi (350 bar), utilizing a wet armature design that allows the working fluid to surround the armature. This can impact performance if used with fluids like water-glycol mixtures over extended periods due to potential varnish formation from heat exposure. The DNDASEV298 incorporates Sun's floating style construction to reduce internal binding risks from excessive installation torque or machining variations in cavity-cartridge assemblies. It fits into the T-31A cavity and belongs to Series 1 with a capacity of up to 4 gpm (15 L/min). The valve's maximum operating pressure is 5000 psi (350 bar), and it features minimal leakage at specified conditions. Other specifications include a solenoid tube diameter of .75 inches (19 mm), valve hex size of .78 inches (22.2 mm), and installation torque ranging from 30 to 35 lbf-ft (41 to 47 Nm). The model weighs approximately .60 lb (.30 kg) and utilizes Viton seals as part of its cartridge seal kit.
The Sun Hydraulics DNDASEV298 (DNDASEV298) is a solenoid-operated, 4-way, 2-position cartridge valve designed with a direct-acting, balanced spool and a soft shift feature to minimize system shock during valve actuation. This feature makes it suitable for applications where reduced hydraulic shock is desired, although it is not recommended for situations requiring precise timing control. The valve offers typical response times between 150 ms and 300 ms, influenced by factors such as flow rate, pressure, coil voltage, oil viscosity, and ambient temperature. It includes a push-type manual override control but is incompatible with weatherized coils when manual override functionality is required. The solenoid tube assembly is rated for fatigue at 5000 psi (350 bar), utilizing a wet armature design that allows the working fluid to surround the armature. This can impact performance if used with fluids like water-glycol mixtures over extended periods due to potential varnish formation from heat exposure. The DNDASEV298 incorporates Sun's floating style construction to reduce internal binding risks from excessive installation torque or machining variations in cavity-cartridge assemblies. It fits into the T-31A cavity and belongs to Series 1 with a capacity of up to 4 gpm (15 L/min). The valve's maximum operating pressure is 5000 psi (350 bar), and it features minimal leakage at specified conditions. Other specifications include a solenoid tube diameter of .75 inches (19 mm), valve hex size of .78 inches (22.2 mm), and installation torque ranging from 30 to 35 lbf-ft (41 to 47 Nm). The model weighs approximately .60 lb (.30 kg) and utilizes Viton seals as part of its cartridge seal kit.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve with a soft shift feature. The soft shift feature greatly reduces system shock due to valve actuation.
- The soft shift cartridge is interchangeable with the standard cartridge, however, the performance limits are lower.
- The soft shift feature can greatly reduce shock due to valve actuation but should not be counted upon in applications where timing is critical. If you need accurate ramping or timing control, consider Sun's electro-proportional valves.
- The soft shift feature results in significant increase in response time over Sun's standard solenoid. Response time is dependant on flow, pressure, coil voltage, oil viscosity and ambient temperature. Typical response time ranges from 150 ms to 300 ms.
- For consistent soft shift performance, port 1 should be at a positive pressure.
- This valve includes a push-type manual override control. Other manual control options such as T or D, cannot be ordered with the soft shift control but can be installed easily in the field. See Twist/Lock Manual Override link above for details. Please note: Manual override functionality is not compatible with weatherized coils.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
Show FAQ