SUN HYDRAULICS
DNDASNV236
$189.62 USD
- SUN HYDRAULICS
- Material:DNDASNV236
- Model:DNDA-SNV@236
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDASNV236 (DNDASNV236) is a solenoid-operated, 4-way, 2-position cartridge valve designed for precise directional control in hydraulic systems. This direct-acting, balanced spool valve features a soft shift capability that significantly reduces system shock during actuation. However, it is important to note that while the soft shift feature minimizes shock, it may not be suitable for applications requiring precise timing control; in such cases, Sun's electroproportional valves are recommended. The soft shift design increases response time compared to standard solenoids, with typical ranges from 150 ms to 300 ms depending on factors like flow and pressure. This cartridge valve can handle a maximum operating pressure of 5000 psi (350 bar) and has a capacity of up to 4 gpm (15 L/min). It includes a push-type manual override control for added operational flexibility, although this feature is not compatible with weatherized coils. The solenoid tube assembly is fatigue-rated for high-pressure service and employs a wet armature design that enhances efficiency but requires consideration of fluid compatibility due to potential heat exposure. Installation is facilitated by the Sun floating style construction which mitigates internal part binding risks. The valve's construction allows for interchangeable use with standard cartridges while maintaining reliable performance under varying installation conditions. Additionally, coil connector options provide protection ratings up to IP69K for enhanced environmental resilience. The DNDASNV236 model weighs approximately .60 lb (0.30 kg) and requires an installation torque between 30 - 35 lbf ft (41 - 47 Nm). For consistent performance, port 1 should maintain positive pressure during operation.
The Sun Hydraulics DNDASNV236 (DNDASNV236) is a solenoid-operated, 4-way, 2-position cartridge valve designed for precise directional control in hydraulic systems. This direct-acting, balanced spool valve features a soft shift capability that significantly reduces system shock during actuation. However, it is important to note that while the soft shift feature minimizes shock, it may not be suitable for applications requiring precise timing control; in such cases, Sun's electroproportional valves are recommended. The soft shift design increases response time compared to standard solenoids, with typical ranges from 150 ms to 300 ms depending on factors like flow and pressure. This cartridge valve can handle a maximum operating pressure of 5000 psi (350 bar) and has a capacity of up to 4 gpm (15 L/min). It includes a push-type manual override control for added operational flexibility, although this feature is not compatible with weatherized coils. The solenoid tube assembly is fatigue-rated for high-pressure service and employs a wet armature design that enhances efficiency but requires consideration of fluid compatibility due to potential heat exposure. Installation is facilitated by the Sun floating style construction which mitigates internal part binding risks. The valve's construction allows for interchangeable use with standard cartridges while maintaining reliable performance under varying installation conditions. Additionally, coil connector options provide protection ratings up to IP69K for enhanced environmental resilience. The DNDASNV236 model weighs approximately .60 lb (0.30 kg) and requires an installation torque between 30 - 35 lbf ft (41 - 47 Nm). For consistent performance, port 1 should maintain positive pressure during operation.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve with a soft shift feature. The soft shift feature greatly reduces system shock due to valve actuation.
- The soft shift cartridge is interchangeable with the standard cartridge, however, the performance limits are lower.
- The soft shift feature can greatly reduce shock due to valve actuation but should not be counted upon in applications where timing is critical. If you need accurate ramping or timing control, consider Sun's electro-proportional valves.
- The soft shift feature results in significant increase in response time over Sun's standard solenoid. Response time is dependant on flow, pressure, coil voltage, oil viscosity and ambient temperature. Typical response time ranges from 150 ms to 300 ms.
- For consistent soft shift performance, port 1 should be at a positive pressure.
- This valve includes a push-type manual override control. Other manual control options such as T or D, cannot be ordered with the soft shift control but can be installed easily in the field. See Twist/Lock Manual Override link above for details. Please note: Manual override functionality is not compatible with weatherized coils.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
Show FAQ