SUN HYDRAULICS
DNDASTVHN24AB
$1,389.92 USD
- SUN HYDRAULICS
- Material:DNDASTVHN24AB
- Model:DNDA-STV-HN@24AB
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDASTVHN24AB (DNDASTVHN24AB) is a solenoid-operated 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool with a soft shift capability. This design minimizes system shock during valve actuation, making it an ideal choice when smooth operation is preferred over the rapid response of standard solenoids. The soft shift feature can be beneficial in reducing shock but may not be suitable for applications requiring precise timing control. For such scenarios, Sun's electro-proportional valves are recommended. The typical response time of this valve ranges from 150 ms to 300 ms, influenced by factors such as flow rate, pressure, coil voltage, oil viscosity, and ambient temperature. Consistent performance requires port 1 to maintain positive pressure. The DNDASTVHN24AB includes a push-type manual override control and uses a wet armature design that allows the working fluid to surround the armature. This aspect should be considered if the coil is energized for extended periods since certain fluids might degrade under these conditions. The solenoid's magnetic design ensures high efficiency and reliable shifting by providing significant spool actuating force per watt expended. This cartridge valve is constructed with Sun's floating style to reduce the risk of internal binding due to installation torque or machining variations. It fits into cavity T-31A and has a capacity of 4 gpm (15 L/min). The maximum operating pressure is rated at 5000 psi (350 bar), with maximum leakage at 10 in\u00b3/min (3000 psi). The solenoid tube diameter measures .75 inches (19 mm), while the hex size is .78 inches (22.2 mm). Installation torque should range between 30-35 lbf ft (41-47 Nm), and the model weighs approximately .60 lb (.30 kg). Seal kits are available in Viton material for maintenance purposes.
The Sun Hydraulics DNDASTVHN24AB (DNDASTVHN24AB) is a solenoid-operated 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool with a soft shift capability. This design minimizes system shock during valve actuation, making it an ideal choice when smooth operation is preferred over the rapid response of standard solenoids. The soft shift feature can be beneficial in reducing shock but may not be suitable for applications requiring precise timing control. For such scenarios, Sun's electro-proportional valves are recommended. The typical response time of this valve ranges from 150 ms to 300 ms, influenced by factors such as flow rate, pressure, coil voltage, oil viscosity, and ambient temperature. Consistent performance requires port 1 to maintain positive pressure. The DNDASTVHN24AB includes a push-type manual override control and uses a wet armature design that allows the working fluid to surround the armature. This aspect should be considered if the coil is energized for extended periods since certain fluids might degrade under these conditions. The solenoid's magnetic design ensures high efficiency and reliable shifting by providing significant spool actuating force per watt expended. This cartridge valve is constructed with Sun's floating style to reduce the risk of internal binding due to installation torque or machining variations. It fits into cavity T-31A and has a capacity of 4 gpm (15 L/min). The maximum operating pressure is rated at 5000 psi (350 bar), with maximum leakage at 10 in\u00b3/min (3000 psi). The solenoid tube diameter measures .75 inches (19 mm), while the hex size is .78 inches (22.2 mm). Installation torque should range between 30-35 lbf ft (41-47 Nm), and the model weighs approximately .60 lb (.30 kg). Seal kits are available in Viton material for maintenance purposes.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve with a soft shift feature. The soft shift feature greatly reduces system shock due to valve actuation.
- The soft shift cartridge is interchangeable with the standard cartridge, however, the performance limits are lower.
- The soft shift feature can greatly reduce shock due to valve actuation but should not be counted upon in applications where timing is critical. If you need accurate ramping or timing control, consider Sun's electro-proportional valves.
- The soft shift feature results in significant increase in response time over Sun's standard solenoid. Response time is dependant on flow, pressure, coil voltage, oil viscosity and ambient temperature. Typical response time ranges from 150 ms to 300 ms.
- For consistent soft shift performance, port 1 should be at a positive pressure.
- This valve includes a push-type manual override control. Other manual control options such as T or D, cannot be ordered with the soft shift control but can be installed easily in the field. See Twist/Lock Manual Override link above for details. Please note: Manual override functionality is not compatible with weatherized coils.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
Show FAQ