SUN HYDRAULICS
DNDATCN4E24V
$432.47 USD
- SUN HYDRAULICS
- Material:DNDATCN4E24V
- Model:DNDA-TCN@4E24V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDATCN4E24V (DNDATCN4E24V) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. Engineered with a fatigue-rated solenoid tube assembly, this valve is suitable for service pressures up to 5000 psi (350 bar) and does not require minimum hydraulic pressure for operation. It features several manual override options, although these are not compatible with weatherized coils. The valve's design includes a wet armature that allows the working fluid to surround the armature, which can be a consideration for long-term coil energization due to heat exposure. The DNDATCN4E24V offers high efficiency through its unique magnetic solenoid design, providing substantial spool actuating force per watt consumed. It incorporates Sun's floating style construction to reduce the risk of internal part binding from excessive installation torque or machining variations. The cartridge is compatible with various coil termination and voltage options, and coils can be mounted in either direction. Furthermore, the coil connectors can achieve ratings up to IP69K for enhanced environmental protection. This model has a capacity of 10 gpm (40 L/min) and typical response time of 50 ms. It supports a maximum switching frequency of 15,000 cycles per hour and has specific requirements for manual override force and stroke length. For sealing needs, Viton seal kits are available both for the cartridge and coil components. The compact design features dimensions such as a solenoid tube diameter of .75 inches (19 mm) and requires an installation torque between 30-35 lbf ft (41-47 Nm). Overall, the DNDATCN4E24V is built for robust performance in demanding hydraulic applications.
The Sun Hydraulics DNDATCN4E24V (DNDATCN4E24V) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. Engineered with a fatigue-rated solenoid tube assembly, this valve is suitable for service pressures up to 5000 psi (350 bar) and does not require minimum hydraulic pressure for operation. It features several manual override options, although these are not compatible with weatherized coils. The valve's design includes a wet armature that allows the working fluid to surround the armature, which can be a consideration for long-term coil energization due to heat exposure. The DNDATCN4E24V offers high efficiency through its unique magnetic solenoid design, providing substantial spool actuating force per watt consumed. It incorporates Sun's floating style construction to reduce the risk of internal part binding from excessive installation torque or machining variations. The cartridge is compatible with various coil termination and voltage options, and coils can be mounted in either direction. Furthermore, the coil connectors can achieve ratings up to IP69K for enhanced environmental protection. This model has a capacity of 10 gpm (40 L/min) and typical response time of 50 ms. It supports a maximum switching frequency of 15,000 cycles per hour and has specific requirements for manual override force and stroke length. For sealing needs, Viton seal kits are available both for the cartridge and coil components. The compact design features dimensions such as a solenoid tube diameter of .75 inches (19 mm) and requires an installation torque between 30-35 lbf ft (41-47 Nm). Overall, the DNDATCN4E24V is built for robust performance in demanding hydraulic applications.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ