SUN HYDRAULICS
DNDATEN4E12V
$432.47 USD
- SUN HYDRAULICS
- Material:DNDATEN4E12V
- Model:DNDA-TEN@4E12V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDATEN4E12V (DNDATEN4E12V) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve is engineered for high performance with a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar) service. It operates without the need for minimum hydraulic pressure and offers several manual override options, although these are not compatible with weatherized coils. The manual controls have a mechanical life expectancy of around 7,000 cycles. This valve features EPDM seals suitable for systems using phosphate ester fluids but should not be exposed to petroleum-based fluids as they can cause damage. The wet armature design allows the working fluid to cool the armature, though caution is needed with certain fluids like water-glycol mixtures which may degrade over time due to heat exposure. The DNDATEN4E12V supports various coil termination and voltage options while maintaining high efficiency due to its unique magnetic design that provides strong spool actuation force per Watt expended. Coils are interchangeable within Sun's Series 1 solenoid products and can be installed in either direction on the tube. The valve also offers coil connector options rated up to IP69K, ensuring robust environmental protection when necessary. It utilizes Sun's floating style construction to minimize internal binding due to installation torque or machining variations. With a capacity of 10 gpm (40 L/min), a typical response time of 50 ms, and a maximum leakage rate of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), this valve is reliable for demanding applications requiring frequent switching up to 15,000 cycles per hour. It has a compact design with dimensions including a .75-inch solenoid tube diameter and an installation torque range of 30-35 lbf-ft (41-47 Nm).
The Sun Hydraulics DNDATEN4E12V (DNDATEN4E12V) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve is engineered for high performance with a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar) service. It operates without the need for minimum hydraulic pressure and offers several manual override options, although these are not compatible with weatherized coils. The manual controls have a mechanical life expectancy of around 7,000 cycles. This valve features EPDM seals suitable for systems using phosphate ester fluids but should not be exposed to petroleum-based fluids as they can cause damage. The wet armature design allows the working fluid to cool the armature, though caution is needed with certain fluids like water-glycol mixtures which may degrade over time due to heat exposure. The DNDATEN4E12V supports various coil termination and voltage options while maintaining high efficiency due to its unique magnetic design that provides strong spool actuation force per Watt expended. Coils are interchangeable within Sun's Series 1 solenoid products and can be installed in either direction on the tube. The valve also offers coil connector options rated up to IP69K, ensuring robust environmental protection when necessary. It utilizes Sun's floating style construction to minimize internal binding due to installation torque or machining variations. With a capacity of 10 gpm (40 L/min), a typical response time of 50 ms, and a maximum leakage rate of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), this valve is reliable for demanding applications requiring frequent switching up to 15,000 cycles per hour. It has a compact design with dimensions including a .75-inch solenoid tube diameter and an installation torque range of 30-35 lbf-ft (41-47 Nm).
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ