SUN HYDRAULICS
DNDATEN612
$249.99 USD
- SUN HYDRAULICS
- Material:DNDATEN612
- Model:DNDA-TEN@612
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDATEN612 (DNDATEN612) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve is engineered for high-performance applications with a fatigue-rated solenoid tube assembly that can withstand up to 5000 psi (350 bar) service pressure. It operates without requiring any minimum hydraulic pressure, ensuring versatile use across various systems. The valve offers multiple manual override options, although these are not compatible with weatherized coils. Notably, the detent mechanism in the manual override is intended for temporary actuation and has a mechanical life expectancy of approximately 7,000 cycles. The DNDATEN612 features EPDM seals suitable for systems using phosphate ester fluids but cautions against exposure to petroleum-based fluids which may damage the seals. It employs a wet armature design where the working fluid surrounds the armature and absorbs heat from the coil; this aspect should be considered during prolonged coil energization as certain fluids may degrade at elevated temperatures. This model provides an efficient solenoid design yielding high spool actuating force per watt expended and offers interchangeable coils with other Sun Series 1 solenoid products. Coil connector options provide protection ratings up to IP69K, with additional weatherized options available for enhanced environmental protection. The valve incorporates Sun's floating style construction to minimize internal binding due to installation torque or machining variations. With a cavity size of T-31A and capable of handling flows up to 10 gpm (40 L/min), this valve supports maximum operating pressures of 5000 psi (350 bar) and typical response times of 50 ms. It allows a switching frequency of up to 15,000 cycles per hour and requires minimal manual override force for operation.
The Sun Hydraulics DNDATEN612 (DNDATEN612) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve is engineered for high-performance applications with a fatigue-rated solenoid tube assembly that can withstand up to 5000 psi (350 bar) service pressure. It operates without requiring any minimum hydraulic pressure, ensuring versatile use across various systems. The valve offers multiple manual override options, although these are not compatible with weatherized coils. Notably, the detent mechanism in the manual override is intended for temporary actuation and has a mechanical life expectancy of approximately 7,000 cycles. The DNDATEN612 features EPDM seals suitable for systems using phosphate ester fluids but cautions against exposure to petroleum-based fluids which may damage the seals. It employs a wet armature design where the working fluid surrounds the armature and absorbs heat from the coil; this aspect should be considered during prolonged coil energization as certain fluids may degrade at elevated temperatures. This model provides an efficient solenoid design yielding high spool actuating force per watt expended and offers interchangeable coils with other Sun Series 1 solenoid products. Coil connector options provide protection ratings up to IP69K, with additional weatherized options available for enhanced environmental protection. The valve incorporates Sun's floating style construction to minimize internal binding due to installation torque or machining variations. With a cavity size of T-31A and capable of handling flows up to 10 gpm (40 L/min), this valve supports maximum operating pressures of 5000 psi (350 bar) and typical response times of 50 ms. It allows a switching frequency of up to 15,000 cycles per hour and requires minimal manual override force for operation.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ