SUN HYDRAULICS
DNDATEN924N
$257.33 USD
- SUN HYDRAULICS
- Material:DNDATEN924N
- Model:DNDA-TEN@924N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDATEN924N (DNDATEN924N) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. Engineered to withstand up to 5000 psi (350 bar), this durable valve does not require a minimum hydraulic pressure for operation. It features a fatigue-rated solenoid tube assembly and offers several manual override options, although these are incompatible with weatherized coils. The D and L control models include a detent mechanism intended for temporary actuation with an approximate mechanical life expectancy of 7,000 cycles. The valve is compatible with EPDM seals for systems utilizing phosphate ester fluids but should avoid petroleum-based substances to prevent seal damage. The valve uses a wet armature design, where the working fluid surrounds the armature and is exposed to coil-generated heat\u2014important to consider during prolonged coil energization as certain fluids may degrade under high temperatures. This product supports various coil termination and voltage options, some featuring surge protection. Its high-efficiency solenoid design delivers substantial spool actuating force per watt, ensuring consistent valve shifting. Coils are interchangeable with other Sun Series 1 products and can be mounted in either direction. With a cavity size of T-31A and Series 1 classification, the valve has a capacity of 10 gpm (40 L/min) and offers IP69K-rated coil connector options for enhanced environmental protection. It incorporates Sun's floating style construction to reduce internal binding risks due to excessive installation torque or machining variations. Additional specifications include a typical response time of 50 ms, maximum leakage at specified viscosity of 10 in\u00b3/min (160 cc/min) at 3000 psi (210 bar), switching frequency up to 15,000 cycles/hr, manual override force requirement of approximately 5 lbs/1000 psi for Port 1, manual override stroke of .10 inches (2.5 mm), solenoid tube diameter of .75 inches (19 mm), valve hex size of .78 inches (22.2 mm), installation torque between 30-35 lbf-ft (41-47 Nm), and model weight of .60 lb (.30 kg).
The Sun Hydraulics DNDATEN924N (DNDATEN924N) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. Engineered to withstand up to 5000 psi (350 bar), this durable valve does not require a minimum hydraulic pressure for operation. It features a fatigue-rated solenoid tube assembly and offers several manual override options, although these are incompatible with weatherized coils. The D and L control models include a detent mechanism intended for temporary actuation with an approximate mechanical life expectancy of 7,000 cycles. The valve is compatible with EPDM seals for systems utilizing phosphate ester fluids but should avoid petroleum-based substances to prevent seal damage. The valve uses a wet armature design, where the working fluid surrounds the armature and is exposed to coil-generated heat\u2014important to consider during prolonged coil energization as certain fluids may degrade under high temperatures. This product supports various coil termination and voltage options, some featuring surge protection. Its high-efficiency solenoid design delivers substantial spool actuating force per watt, ensuring consistent valve shifting. Coils are interchangeable with other Sun Series 1 products and can be mounted in either direction. With a cavity size of T-31A and Series 1 classification, the valve has a capacity of 10 gpm (40 L/min) and offers IP69K-rated coil connector options for enhanced environmental protection. It incorporates Sun's floating style construction to reduce internal binding risks due to excessive installation torque or machining variations. Additional specifications include a typical response time of 50 ms, maximum leakage at specified viscosity of 10 in\u00b3/min (160 cc/min) at 3000 psi (210 bar), switching frequency up to 15,000 cycles/hr, manual override force requirement of approximately 5 lbs/1000 psi for Port 1, manual override stroke of .10 inches (2.5 mm), solenoid tube diameter of .75 inches (19 mm), valve hex size of .78 inches (22.2 mm), installation torque between 30-35 lbf-ft (41-47 Nm), and model weight of .60 lb (.30 kg).
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ