SUN HYDRAULICS
DNDATNV828
$269.05 USD
- SUN HYDRAULICS
- Material:DNDATNV828
- Model:DNDA-TNV@828
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDATNV828 (DNDATNV828) is a solenoid-operated, 4-way, 2-position cartridge valve designed for precise directional control in hydraulic systems. This direct-acting and balanced spool directional valve operates efficiently without the need for minimum hydraulic pressure, making it versatile for various applications. The solenoid tube assembly is fatigue-rated for 5000 psi (350 bar), ensuring durability and reliability under high-pressure conditions. The valve features a wet armature design, allowing the working fluid to surround the armature and manage heat dissipation effectively. However, care should be taken with fluids like water-glycol mixtures that may degrade over time due to heat exposure. The DNDATNV828 offers several manual override options, including models with temporary actuation detent mechanisms. These manual controls have a mechanical life expectancy of approximately 7,000 cycles. For systems utilizing phosphate ester fluids, EPDM seals are recommended to prevent damage from petroleum-based substances. The valve supports a wide range of coil termination and voltage options, enhancing its adaptability to different system requirements. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction. With a capacity of 10 gpm (40 L/min) and maximum operating pressure of 5000 psi (350 bar), this valve is built for high-performance applications. It exhibits a typical response time of 50 ms and can handle switching frequencies up to 15,000 cycles per hour. The valve's construction minimizes potential internal binding due to excessive installation torque or machining variations, thanks to Sun's floating style design. Additional weatherized coils and kits are available for enhanced environmental protection, ensuring reliable performance in demanding conditions.
The Sun Hydraulics DNDATNV828 (DNDATNV828) is a solenoid-operated, 4-way, 2-position cartridge valve designed for precise directional control in hydraulic systems. This direct-acting and balanced spool directional valve operates efficiently without the need for minimum hydraulic pressure, making it versatile for various applications. The solenoid tube assembly is fatigue-rated for 5000 psi (350 bar), ensuring durability and reliability under high-pressure conditions. The valve features a wet armature design, allowing the working fluid to surround the armature and manage heat dissipation effectively. However, care should be taken with fluids like water-glycol mixtures that may degrade over time due to heat exposure. The DNDATNV828 offers several manual override options, including models with temporary actuation detent mechanisms. These manual controls have a mechanical life expectancy of approximately 7,000 cycles. For systems utilizing phosphate ester fluids, EPDM seals are recommended to prevent damage from petroleum-based substances. The valve supports a wide range of coil termination and voltage options, enhancing its adaptability to different system requirements. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction. With a capacity of 10 gpm (40 L/min) and maximum operating pressure of 5000 psi (350 bar), this valve is built for high-performance applications. It exhibits a typical response time of 50 ms and can handle switching frequencies up to 15,000 cycles per hour. The valve's construction minimizes potential internal binding due to excessive installation torque or machining variations, thanks to Sun's floating style design. Additional weatherized coils and kits are available for enhanced environmental protection, ensuring reliable performance in demanding conditions.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ