SUN HYDRAULICS
DNDATSN214
$254.16 USD
- SUN HYDRAULICS
- Material:DNDATSN214
- Model:DNDA-TSN@214
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDATSN214 (DNDATSN214) is a solenoid-operated, 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool design. This valve is engineered for high performance with a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar) service pressure. It operates without the need for minimum hydraulic pressure, making it versatile for various applications. The valve offers multiple manual override options, although it's important to note that manual override functionality is not compatible with weatherized coils. For models equipped with D or L control, the detent mechanism in the manual override is intended for temporary actuation and boasts a mechanical life expectancy of approximately 7,000 cycles. The cartridge comes with EPDM seals suitable for systems using phosphate ester fluids; however, exposure to petroleum-based fluids can damage these seals. It utilizes a wet armature design where the working fluid surrounds the armature and absorbs heat generated by the coil, potentially affecting functionality if energized over extended periods. The solenoid's magnetic design ensures high efficiency and reliable valve shifting by delivering substantial spool actuating force per watt expended. The DNDATSN214 offers various coil termination and voltage options, including surge protection capabilities. Coils are interchangeable within Sun Series 1 solenoid products and can be mounted in either direction on the tube. Coil connector options are available with ratings up to IP69K for enhanced environmental protection. Incorporating Sun's floating style construction minimizes internal part binding risks due to excessive installation torque or cavity machining variations. With a capacity of 10 gpm (40 L/min), this valve achieves typical response times of 50 milliseconds and supports switching frequencies up to 15,000 cycles per hour. It requires an installation torque between 30-35 lbf-ft (41-47 Nm) and weighs approximately .60 lb (0.30 kg).
The Sun Hydraulics DNDATSN214 (DNDATSN214) is a solenoid-operated, 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool design. This valve is engineered for high performance with a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar) service pressure. It operates without the need for minimum hydraulic pressure, making it versatile for various applications. The valve offers multiple manual override options, although it's important to note that manual override functionality is not compatible with weatherized coils. For models equipped with D or L control, the detent mechanism in the manual override is intended for temporary actuation and boasts a mechanical life expectancy of approximately 7,000 cycles. The cartridge comes with EPDM seals suitable for systems using phosphate ester fluids; however, exposure to petroleum-based fluids can damage these seals. It utilizes a wet armature design where the working fluid surrounds the armature and absorbs heat generated by the coil, potentially affecting functionality if energized over extended periods. The solenoid's magnetic design ensures high efficiency and reliable valve shifting by delivering substantial spool actuating force per watt expended. The DNDATSN214 offers various coil termination and voltage options, including surge protection capabilities. Coils are interchangeable within Sun Series 1 solenoid products and can be mounted in either direction on the tube. Coil connector options are available with ratings up to IP69K for enhanced environmental protection. Incorporating Sun's floating style construction minimizes internal part binding risks due to excessive installation torque or cavity machining variations. With a capacity of 10 gpm (40 L/min), this valve achieves typical response times of 50 milliseconds and supports switching frequencies up to 15,000 cycles per hour. It requires an installation torque between 30-35 lbf-ft (41-47 Nm) and weighs approximately .60 lb (0.30 kg).
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ