SUN HYDRAULICS
DNDATSV224
$259.62 USD
- SUN HYDRAULICS
- Material:DNDATSV224
- Model:DNDA-TSV@224
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDATSV224 (DNDATSV224) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting and balanced spool directional control. This valve is engineered with a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar), ensuring durability under high-pressure conditions. Notably, the valve requires no minimum hydraulic pressure for operation, making it versatile across various applications. It features multiple manual override options, although weatherized coils are incompatible with these overrides. The mechanical life expectancy of the manual control assembly on models with D or L control is approximately 7,000 cycles. The DNDATSV224 is compatible with EPDM seals for systems using phosphate ester fluids but should avoid petroleum-based fluids to prevent seal damage. Its wet armature design allows the working fluid to surround the armature, which can be affected by coil-generated heat over time, particularly in fluids like water-glycol mixtures that may degrade into varnishes. The solenoid's magnetic design enhances efficiency by providing high spool actuating force per Watt expended. A variety of coil termination and voltage options are available, including configurations with surge protection. Coils are interchangeable within Sun Series 1 solenoid products and can be mounted in either direction on the tube. Coil connector options provide ratings up to IP69K for enhanced environmental protection. The valve incorporates Sun's floating style construction to reduce internal binding risks due to installation torque or machining variations. With a capacity of 10 gpm (40 L/min) and a maximum leakage rate of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), this valve offers reliable performance in demanding applications. It also boasts a switching frequency of up to 15,000 cycles per hour and a typical response time of 50 ms, making it suitable for rapid operation scenarios.
The Sun Hydraulics DNDATSV224 (DNDATSV224) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting and balanced spool directional control. This valve is engineered with a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar), ensuring durability under high-pressure conditions. Notably, the valve requires no minimum hydraulic pressure for operation, making it versatile across various applications. It features multiple manual override options, although weatherized coils are incompatible with these overrides. The mechanical life expectancy of the manual control assembly on models with D or L control is approximately 7,000 cycles. The DNDATSV224 is compatible with EPDM seals for systems using phosphate ester fluids but should avoid petroleum-based fluids to prevent seal damage. Its wet armature design allows the working fluid to surround the armature, which can be affected by coil-generated heat over time, particularly in fluids like water-glycol mixtures that may degrade into varnishes. The solenoid's magnetic design enhances efficiency by providing high spool actuating force per Watt expended. A variety of coil termination and voltage options are available, including configurations with surge protection. Coils are interchangeable within Sun Series 1 solenoid products and can be mounted in either direction on the tube. Coil connector options provide ratings up to IP69K for enhanced environmental protection. The valve incorporates Sun's floating style construction to reduce internal binding risks due to installation torque or machining variations. With a capacity of 10 gpm (40 L/min) and a maximum leakage rate of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), this valve offers reliable performance in demanding applications. It also boasts a switching frequency of up to 15,000 cycles per hour and a typical response time of 50 ms, making it suitable for rapid operation scenarios.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ