SUN HYDRAULICS
DNDATUN2E24V
$447.66 USD
- SUN HYDRAULICS
- Material:DNDATUN2E24V
- Model:DNDA-TUN@2E24V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDATUN2E24V (DNDATUN2E24V) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting and balanced spool directional control. This valve is engineered for high performance, with a solenoid tube assembly rated for fatigue at 5000 psi (350 bar), ensuring robust service life. It features a direct actuation mechanism that does not require minimum hydraulic pressure to operate, making it versatile for various applications. The cartridge offers several manual override options, although the manual override is incompatible with weatherized coils. This model incorporates a wet armature design where the working fluid surrounds the armature, which can be affected by prolonged coil energization due to heat exposure. Notably, water-glycol mixtures may degrade over time under these conditions. The valve's coil options are highly efficient, offering significant spool actuating force per watt and ensuring reliable operation. Coils are interchangeable with other Sun Series 1 solenoid products and can be installed in either direction. The DNDATUN2E24V supports a wide range of coil termination and voltage options, with some configurations providing surge protection and IP69K-rated connector options for enhanced environmental resilience. The valve's floating style construction minimizes the risk of internal binding from excessive installation torque or machining variations in cavity/cartridge interfaces. With a capacity of 10 gpm (40 L/min) and a maximum operating pressure of 5000 psi (350 bar), this valve is suitable for demanding hydraulic systems. Its typical response time is approximately 50 ms, with a maximum leakage rate of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). Designed for high switching frequency up to 15,000 cycles/hr, it also features an easy-to-use manual override mechanism requiring minimal force to operate.
The Sun Hydraulics DNDATUN2E24V (DNDATUN2E24V) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting and balanced spool directional control. This valve is engineered for high performance, with a solenoid tube assembly rated for fatigue at 5000 psi (350 bar), ensuring robust service life. It features a direct actuation mechanism that does not require minimum hydraulic pressure to operate, making it versatile for various applications. The cartridge offers several manual override options, although the manual override is incompatible with weatherized coils. This model incorporates a wet armature design where the working fluid surrounds the armature, which can be affected by prolonged coil energization due to heat exposure. Notably, water-glycol mixtures may degrade over time under these conditions. The valve's coil options are highly efficient, offering significant spool actuating force per watt and ensuring reliable operation. Coils are interchangeable with other Sun Series 1 solenoid products and can be installed in either direction. The DNDATUN2E24V supports a wide range of coil termination and voltage options, with some configurations providing surge protection and IP69K-rated connector options for enhanced environmental resilience. The valve's floating style construction minimizes the risk of internal binding from excessive installation torque or machining variations in cavity/cartridge interfaces. With a capacity of 10 gpm (40 L/min) and a maximum operating pressure of 5000 psi (350 bar), this valve is suitable for demanding hydraulic systems. Its typical response time is approximately 50 ms, with a maximum leakage rate of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). Designed for high switching frequency up to 15,000 cycles/hr, it also features an easy-to-use manual override mechanism requiring minimal force to operate.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ