SUN HYDRAULICS
DNDATUN928
$261.80 USD
- SUN HYDRAULICS
- Material:DNDATUN928
- Model:DNDA-TUN@928
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDATUN928 (DNDATUN928) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. Featuring a fatigue-rated solenoid tube assembly for up to 5000 psi (350 bar) service, this valve operates without the need for minimum hydraulic pressure. It offers multiple manual override options, although these are not compatible with weatherized coils. The D, L, and T manual controls have a mechanical life expectancy of approximately 7,000 cycles and require a manual override force of 5 lbs/1000 psi at Port 1. This cartridge is suitable for systems using phosphate ester fluids when equipped with EPDM seals; however, exposure to petroleum-based fluids can damage these seals. The valve uses a wet armature design to enhance reliability by allowing the working fluid to cool the armature. However, care should be taken with water-glycol mixtures as they may degrade over time due to heat exposure. The solenoid's magnetic design optimizes efficiency by providing high spool actuating force per Watt expended. Various coil termination and voltage options are available, including those with surge protection, and coils can be mounted in either direction on the tube. This model incorporates Sun's floating style construction to reduce internal binding risks due to excessive installation torque or machining variations. It fits into T31A cavities and belongs to Series 1 with a capacity of 10 gpm (40 L/min). The maximum valve leakage at 110 SUS (24 cSt) is limited to 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), while its switching frequency reaches up to 15,000 cycles/hour. The valve's response time is typically around 50 ms and it features a hex size of .78 inches (22.2 mm) with an installation torque requirement of 30-35 lbf.ft (41-47 Nm).
The Sun Hydraulics DNDATUN928 (DNDATUN928) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. Featuring a fatigue-rated solenoid tube assembly for up to 5000 psi (350 bar) service, this valve operates without the need for minimum hydraulic pressure. It offers multiple manual override options, although these are not compatible with weatherized coils. The D, L, and T manual controls have a mechanical life expectancy of approximately 7,000 cycles and require a manual override force of 5 lbs/1000 psi at Port 1. This cartridge is suitable for systems using phosphate ester fluids when equipped with EPDM seals; however, exposure to petroleum-based fluids can damage these seals. The valve uses a wet armature design to enhance reliability by allowing the working fluid to cool the armature. However, care should be taken with water-glycol mixtures as they may degrade over time due to heat exposure. The solenoid's magnetic design optimizes efficiency by providing high spool actuating force per Watt expended. Various coil termination and voltage options are available, including those with surge protection, and coils can be mounted in either direction on the tube. This model incorporates Sun's floating style construction to reduce internal binding risks due to excessive installation torque or machining variations. It fits into T31A cavities and belongs to Series 1 with a capacity of 10 gpm (40 L/min). The maximum valve leakage at 110 SUS (24 cSt) is limited to 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), while its switching frequency reaches up to 15,000 cycles/hour. The valve's response time is typically around 50 ms and it features a hex size of .78 inches (22.2 mm) with an installation torque requirement of 30-35 lbf.ft (41-47 Nm).
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ