SUN HYDRAULICS
DNDATUV298
$296.25 USD
- SUN HYDRAULICS
- Material:DNDATUV298
- Model:DNDA-TUV@298
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDATUV298 (DNDATUV298) is a solenoid-operated 4-way, 2-position cartridge valve that features a direct-acting, balanced spool directional design. This valve is engineered for high performance with a fatigue-rated solenoid tube assembly that can handle up to 5000 psi (350 bar) service pressure. It operates without the need for minimum hydraulic pressure and offers various manual override options, although these are not compatible with weatherized coils. The manual override's detent mechanism is designed for temporary use and has an estimated mechanical life of approximately 7,000 cycles. This cartridge utilizes EPDM seals suitable for phosphate ester fluid systems, but they should not be exposed to petroleum-based fluids as this can cause seal damage. The wet armature design allows the working fluid to surround the armature, which may impact function if the coil is energized over long periods due to heat exposure. The valve supports a variety of coil termination and voltage options, including those with surge protection, ensuring high efficiency and reliable operation. Coils are interchangeable within Sun's Series 1 solenoid products and can be mounted bi-directionally on the tube. The valve incorporates Sun's floating style construction to reduce internal binding risks from excessive torque or machining variations in cavity/cartridge installations. It has a capacity of 10 gpm (40 L/min) and features a typical response time of 50 ms. The valve is designed for high switching frequency, capable of up to 15,000 cycles per hour. Additional specifications include a maximum leakage rate of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), manual override force requirement of 5 lbs/1000 psi (33 N/100 bar), and installation torque range between 30-35 lbf-ft (41-47 Nm).
The Sun Hydraulics DNDATUV298 (DNDATUV298) is a solenoid-operated 4-way, 2-position cartridge valve that features a direct-acting, balanced spool directional design. This valve is engineered for high performance with a fatigue-rated solenoid tube assembly that can handle up to 5000 psi (350 bar) service pressure. It operates without the need for minimum hydraulic pressure and offers various manual override options, although these are not compatible with weatherized coils. The manual override's detent mechanism is designed for temporary use and has an estimated mechanical life of approximately 7,000 cycles. This cartridge utilizes EPDM seals suitable for phosphate ester fluid systems, but they should not be exposed to petroleum-based fluids as this can cause seal damage. The wet armature design allows the working fluid to surround the armature, which may impact function if the coil is energized over long periods due to heat exposure. The valve supports a variety of coil termination and voltage options, including those with surge protection, ensuring high efficiency and reliable operation. Coils are interchangeable within Sun's Series 1 solenoid products and can be mounted bi-directionally on the tube. The valve incorporates Sun's floating style construction to reduce internal binding risks from excessive torque or machining variations in cavity/cartridge installations. It has a capacity of 10 gpm (40 L/min) and features a typical response time of 50 ms. The valve is designed for high switching frequency, capable of up to 15,000 cycles per hour. Additional specifications include a maximum leakage rate of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), manual override force requirement of 5 lbs/1000 psi (33 N/100 bar), and installation torque range between 30-35 lbf-ft (41-47 Nm).
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ