SUN HYDRAULICS
DNDATYV812N
$264.78 USD
- SUN HYDRAULICS
- Material:DNDATYV812N
- Model:DNDA-TYV@812N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDATYV812N (DNDATYV812N) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. It features a solenoid tube assembly that is fatigue-rated for up to 5000 psi (350 bar), ensuring robust performance in demanding applications. This valve does not require minimum hydraulic pressure for operation and offers multiple manual override options, although these are incompatible with weatherized coils. The manual override's detent mechanism is intended for temporary actuation, with an estimated mechanical life of about 7,000 cycles. EPDM seals are used for compatibility with phosphate ester fluids; however, they should not be exposed to petroleum-based substances as this can cause seal damage. The valve employs a wet armature design, where the working fluid surrounds the armature and absorbs heat from the coil\u2014important to consider if the coil remains energized for extended durations. Various coil termination and voltage configurations are available, some offering surge protection. The solenoid's magnetic design enhances efficiency by providing high spool actuating force per watt expended, ensuring reliable shifting. Coils can be interchanged with other Sun Series 1 solenoid products and mounted in either direction on the tube. Coil connectors offer ratings up to IP69K for enhanced environmental protection. The Sun floating style construction reduces internal part binding risks due to excessive installation torque or cavity/cartridge machining variations. This cartridge fits into cavity T-31A and belongs to Series 1, with a capacity of 10 gpm (40 L/min) and a maximum operating pressure of 5000 psi (350 bar). It boasts typical response times of 50 ms and minimal leakage at specified conditions.
The Sun Hydraulics DNDATYV812N (DNDATYV812N) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. It features a solenoid tube assembly that is fatigue-rated for up to 5000 psi (350 bar), ensuring robust performance in demanding applications. This valve does not require minimum hydraulic pressure for operation and offers multiple manual override options, although these are incompatible with weatherized coils. The manual override's detent mechanism is intended for temporary actuation, with an estimated mechanical life of about 7,000 cycles. EPDM seals are used for compatibility with phosphate ester fluids; however, they should not be exposed to petroleum-based substances as this can cause seal damage. The valve employs a wet armature design, where the working fluid surrounds the armature and absorbs heat from the coil\u2014important to consider if the coil remains energized for extended durations. Various coil termination and voltage configurations are available, some offering surge protection. The solenoid's magnetic design enhances efficiency by providing high spool actuating force per watt expended, ensuring reliable shifting. Coils can be interchanged with other Sun Series 1 solenoid products and mounted in either direction on the tube. Coil connectors offer ratings up to IP69K for enhanced environmental protection. The Sun floating style construction reduces internal part binding risks due to excessive installation torque or cavity/cartridge machining variations. This cartridge fits into cavity T-31A and belongs to Series 1, with a capacity of 10 gpm (40 L/min) and a maximum operating pressure of 5000 psi (350 bar). It boasts typical response times of 50 ms and minimal leakage at specified conditions.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ