SUN HYDRAULICS
DNDAXCV624N
$220.50 USD
- SUN HYDRAULICS
- Material:DNDAXCV624N
- Model:DNDA-XCV@624N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDAXCV624N (DNDAXCV624N) is a solenoid-operated 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool design. It is engineered for high performance with a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar). This valve operates without the need for minimum hydraulic pressure and offers multiple manual override options, although these are not compatible with weatherized coils. Models equipped with D or L control have a detent mechanism suitable for temporary actuation, boasting a mechanical life expectancy of approximately 7,000 cycles. Ideal for systems using phosphate ester fluids, cartridges with EPDM seals must avoid petroleum-based fluids to prevent seal damage. The valve employs a wet armature design to mitigate heat issues from prolonged coil energization. This model offers various coil termination and voltage configurations, including options with surge protection. The high-efficiency solenoid design ensures reliable valve shifting by maximizing spool actuating force per watt expended. Coils are interchangeable within the Sun Series 1 range and can be mounted in either direction on the tube. Coil connectors are available with protection ratings up to IP69K for enhanced environmental resilience. The valve's construction minimizes the risk of internal component binding due to installation torque or machining variations. Key specifications include a T31A cavity, Series 1 classification, and a capacity of 10 gpm (40 L/min). It supports maximum operating pressures of up to 5000 psi (350 bar) and achieves typical response times of around 50 ms. With a switching frequency capability of 15,000 cycles per hour and minimal leakage at specified conditions, this valve is robust and efficient for demanding applications. The model weighs approximately .60 lb (.30 kg) and requires specific installation torque settings between 30-35 lbf ft (41-47 Nm). Seal kits in Viton material are available for maintenance purposes.
The Sun Hydraulics DNDAXCV624N (DNDAXCV624N) is a solenoid-operated 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool design. It is engineered for high performance with a fatigue-rated solenoid tube assembly capable of handling up to 5000 psi (350 bar). This valve operates without the need for minimum hydraulic pressure and offers multiple manual override options, although these are not compatible with weatherized coils. Models equipped with D or L control have a detent mechanism suitable for temporary actuation, boasting a mechanical life expectancy of approximately 7,000 cycles. Ideal for systems using phosphate ester fluids, cartridges with EPDM seals must avoid petroleum-based fluids to prevent seal damage. The valve employs a wet armature design to mitigate heat issues from prolonged coil energization. This model offers various coil termination and voltage configurations, including options with surge protection. The high-efficiency solenoid design ensures reliable valve shifting by maximizing spool actuating force per watt expended. Coils are interchangeable within the Sun Series 1 range and can be mounted in either direction on the tube. Coil connectors are available with protection ratings up to IP69K for enhanced environmental resilience. The valve's construction minimizes the risk of internal component binding due to installation torque or machining variations. Key specifications include a T31A cavity, Series 1 classification, and a capacity of 10 gpm (40 L/min). It supports maximum operating pressures of up to 5000 psi (350 bar) and achieves typical response times of around 50 ms. With a switching frequency capability of 15,000 cycles per hour and minimal leakage at specified conditions, this valve is robust and efficient for demanding applications. The model weighs approximately .60 lb (.30 kg) and requires specific installation torque settings between 30-35 lbf ft (41-47 Nm). Seal kits in Viton material are available for maintenance purposes.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ