SUN HYDRAULICS
DNDAXLN712
$215.54 USD
- SUN HYDRAULICS
- Material:DNDAXLN712
- Model:DNDA-XLN@712
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDAXLN712 (DNDAXLN712) is a solenoid-operated, 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool design. This versatile directional valve is engineered for high-performance applications, with a solenoid tube assembly fatigue rated for up to 5000 psi (350 bar), ensuring reliable operation under demanding conditions. Unlike pilot-operated valves, this direct-acting model requires no minimum hydraulic pressure to function, making it suitable for various hydraulic systems. The valve offers multiple manual override options; however, these are not compatible with weatherized coils. For models equipped with the D or L control, the manual override's detent mechanism is intended for temporary actuation and has an estimated mechanical life of around 7,000 cycles. The DNDAXLN712 utilizes a wet armature design where the working fluid surrounds the armature and absorbs heat generated by the coil. Users should be aware that certain fluids like water-glycol mixtures may degrade over time due to this heat exposure. A wide range of coil termination and voltage choices are available to meet specific application requirements, with options providing surge protection and IP69K-rated connectors for enhanced environmental resistance. This valve incorporates Sun's floating style construction to minimize internal component binding due to installation torque or cavity machining variations. It supports a maximum flow capacity of 10 gpm (40 L/min) and can handle operating pressures up to 5000 psi (350 bar). The typical response time is approximately 50 ms, with a switching frequency capability of up to 15,000 cycles per hour. The valve's compact design includes a solenoid tube diameter of .75 inches (19 mm) and weighs about .60 lbs (.30 kg), making it both efficient and easy to integrate into existing systems.
The Sun Hydraulics DNDAXLN712 (DNDAXLN712) is a solenoid-operated, 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool design. This versatile directional valve is engineered for high-performance applications, with a solenoid tube assembly fatigue rated for up to 5000 psi (350 bar), ensuring reliable operation under demanding conditions. Unlike pilot-operated valves, this direct-acting model requires no minimum hydraulic pressure to function, making it suitable for various hydraulic systems. The valve offers multiple manual override options; however, these are not compatible with weatherized coils. For models equipped with the D or L control, the manual override's detent mechanism is intended for temporary actuation and has an estimated mechanical life of around 7,000 cycles. The DNDAXLN712 utilizes a wet armature design where the working fluid surrounds the armature and absorbs heat generated by the coil. Users should be aware that certain fluids like water-glycol mixtures may degrade over time due to this heat exposure. A wide range of coil termination and voltage choices are available to meet specific application requirements, with options providing surge protection and IP69K-rated connectors for enhanced environmental resistance. This valve incorporates Sun's floating style construction to minimize internal component binding due to installation torque or cavity machining variations. It supports a maximum flow capacity of 10 gpm (40 L/min) and can handle operating pressures up to 5000 psi (350 bar). The typical response time is approximately 50 ms, with a switching frequency capability of up to 15,000 cycles per hour. The valve's compact design includes a solenoid tube diameter of .75 inches (19 mm) and weighs about .60 lbs (.30 kg), making it both efficient and easy to integrate into existing systems.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ