SUN HYDRAULICS
DNDAXLN814N
$221.70 USD
- SUN HYDRAULICS
- Material:DNDAXLN814N
- Model:DNDA-XLN@814N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDAXLN814N (DNDAXLN814N) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This versatile valve is fatigue-rated for up to 5000 psi (350 bar) service and operates without the need for minimum hydraulic pressure. It features a wet armature design that allows the working fluid to surround the armature, effectively dissipating heat generated by the coil, although caution is needed with fluids like water-glycol mixtures that may degrade over time at high temperatures. The valve offers several manual override options, including versions without manual override and those with detent mechanisms for temporary actuation. It has a mechanical life expectancy of approximately 7,000 cycles for models with D, L, and T controls. The DNDAXLN814N model supports various coil termination and voltage configurations with optional surge protection. Its coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in any direction on the tube. Connector options provide ratings up to IP69K for enhanced environmental protection. The valve incorporates Sun\u2019s floating style construction to reduce internal binding risks due to installation torque or machining variations. With a cavity size of T-31A and a capacity of 10 gpm (40 L/min), this cartridge has a typical response time of 50 ms and can handle a maximum leakage of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). The switching frequency reaches up to 15,000 cycles per hour. The valve requires manual override force of approximately 5 lbs at 1000 psi (33 N at 100 bar) and features an installation torque range between 30 to 35 lbf\u00b7ft (41 to 47 Nm). Weighing just .60 lb (.30 kg), it comes with Viton seal kits available for both cartridge and coil applications.
The Sun Hydraulics DNDAXLN814N (DNDAXLN814N) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This versatile valve is fatigue-rated for up to 5000 psi (350 bar) service and operates without the need for minimum hydraulic pressure. It features a wet armature design that allows the working fluid to surround the armature, effectively dissipating heat generated by the coil, although caution is needed with fluids like water-glycol mixtures that may degrade over time at high temperatures. The valve offers several manual override options, including versions without manual override and those with detent mechanisms for temporary actuation. It has a mechanical life expectancy of approximately 7,000 cycles for models with D, L, and T controls. The DNDAXLN814N model supports various coil termination and voltage configurations with optional surge protection. Its coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in any direction on the tube. Connector options provide ratings up to IP69K for enhanced environmental protection. The valve incorporates Sun\u2019s floating style construction to reduce internal binding risks due to installation torque or machining variations. With a cavity size of T-31A and a capacity of 10 gpm (40 L/min), this cartridge has a typical response time of 50 ms and can handle a maximum leakage of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar). The switching frequency reaches up to 15,000 cycles per hour. The valve requires manual override force of approximately 5 lbs at 1000 psi (33 N at 100 bar) and features an installation torque range between 30 to 35 lbf\u00b7ft (41 to 47 Nm). Weighing just .60 lb (.30 kg), it comes with Viton seal kits available for both cartridge and coil applications.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ