SUN HYDRAULICS
DNDAXNV536
$224.48 USD
- SUN HYDRAULICS
- Material:DNDAXNV536
- Model:DNDA-XNV@536
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDAXNV536 (Material Number: DNDAXNV536) is a solenoid-operated, 4-way, 2-position cartridge valve known for its direct-acting, balanced spool design. This valve is fatigue-rated for service up to 5000 psi (350 bar), ensuring reliable performance without the need for minimum hydraulic pressure. It features various manual override options, though these are not compatible with weatherized coils. The manual control assembly has a life expectancy of about 7,000 cycles and is designed for temporary actuation in models equipped with the D or L control. Cartridges equipped with EPDM seals are suitable for systems using phosphate ester fluids but can be damaged by petroleum-based substances. The valve's wet armature design allows the working fluid to cool the armature but may lead to varnish formation in some fluids over time if the coil remains energized too long. This model offers a range of coil termination and voltage options, including those with surge protection, contributing to its high efficiency and reliable valve shifting capabilities. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. Connector options provide ratings up to IP69K for enhanced environmental protection. Furthermore, its floating style construction minimizes internal part binding due to excessive installation torque or machining variations. With a capacity of 10 gpm (40 L/min), a typical response time of 50 ms, and a switching frequency of up to 15,000 cycles per hour, this cartridge valve delivers robust performance across various applications while maintaining low maximum leakage levels at specified conditions.
The Sun Hydraulics DNDAXNV536 (Material Number: DNDAXNV536) is a solenoid-operated, 4-way, 2-position cartridge valve known for its direct-acting, balanced spool design. This valve is fatigue-rated for service up to 5000 psi (350 bar), ensuring reliable performance without the need for minimum hydraulic pressure. It features various manual override options, though these are not compatible with weatherized coils. The manual control assembly has a life expectancy of about 7,000 cycles and is designed for temporary actuation in models equipped with the D or L control. Cartridges equipped with EPDM seals are suitable for systems using phosphate ester fluids but can be damaged by petroleum-based substances. The valve's wet armature design allows the working fluid to cool the armature but may lead to varnish formation in some fluids over time if the coil remains energized too long. This model offers a range of coil termination and voltage options, including those with surge protection, contributing to its high efficiency and reliable valve shifting capabilities. Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction on the tube. Connector options provide ratings up to IP69K for enhanced environmental protection. Furthermore, its floating style construction minimizes internal part binding due to excessive installation torque or machining variations. With a capacity of 10 gpm (40 L/min), a typical response time of 50 ms, and a switching frequency of up to 15,000 cycles per hour, this cartridge valve delivers robust performance across various applications while maintaining low maximum leakage levels at specified conditions.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ