SUN HYDRAULICS
DNDYDXV612N
$307.67 USD
- SUN HYDRAULICS
- Material:DNDYDXV612N
- Model:DNDY-DXV@612N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDYDXV612N (DNDYDXV612N) is a solenoid-operated 6-way, 2-position cartridge valve designed for selecting between two separate hydraulic circuits. In its de-energized state, it connects ports P and T to the first circuit, and when energized, it connects them to the second circuit. This direct-acting valve features a balanced spool design and does not require a minimum hydraulic pressure for operation. It is fatigue rated for service up to 5000 psi (350 bar). The valve incorporates a wet armature design, which allows the working fluid to surround the armature, potentially affecting function if exposed to prolonged coil-generated heat. Various manual override options are available, though they are incompatible with weatherized coils. The solenoid's magnetic design provides high efficiency with significant spool actuating force per watt expended, ensuring reliable shifting. Coils can be interchanged with other Sun Series 1 solenoid products and mounted in either direction on the tube. The valve supports coil termination and voltage options with ratings up to IP69K for environmental protection. It employs Sun's floating style construction to reduce internal binding risks due to installation torque or machining variations. With a capacity of 5 gpm (20 L/min) and typical response time of 50 ms, this valve is suitable for applications requiring frequent switching up to 15,000 cycles per hour. The valve has a maximum leakage rate of 5 in\u00b3/min at 3000 psi (80 cc/min at 210 bar), measures .75 inches in solenoid tube diameter, and weighs .60 lb (0.30 kg). Installation requires torque between 30-35 lbf ft (41-47 Nm). Seal kits are available in Viton material for both cartridge and coil components.
The Sun Hydraulics DNDYDXV612N (DNDYDXV612N) is a solenoid-operated 6-way, 2-position cartridge valve designed for selecting between two separate hydraulic circuits. In its de-energized state, it connects ports P and T to the first circuit, and when energized, it connects them to the second circuit. This direct-acting valve features a balanced spool design and does not require a minimum hydraulic pressure for operation. It is fatigue rated for service up to 5000 psi (350 bar). The valve incorporates a wet armature design, which allows the working fluid to surround the armature, potentially affecting function if exposed to prolonged coil-generated heat. Various manual override options are available, though they are incompatible with weatherized coils. The solenoid's magnetic design provides high efficiency with significant spool actuating force per watt expended, ensuring reliable shifting. Coils can be interchanged with other Sun Series 1 solenoid products and mounted in either direction on the tube. The valve supports coil termination and voltage options with ratings up to IP69K for environmental protection. It employs Sun's floating style construction to reduce internal binding risks due to installation torque or machining variations. With a capacity of 5 gpm (20 L/min) and typical response time of 50 ms, this valve is suitable for applications requiring frequent switching up to 15,000 cycles per hour. The valve has a maximum leakage rate of 5 in\u00b3/min at 3000 psi (80 cc/min at 210 bar), measures .75 inches in solenoid tube diameter, and weighs .60 lb (0.30 kg). Installation requires torque between 30-35 lbf ft (41-47 Nm). Seal kits are available in Viton material for both cartridge and coil components.
This solenoid-operated 6-way, 2-position cartridge is a direct-acting, balanced spool valve. The typical use for this valve is to select between two separate circuits. The de-energized condition connects P and T to the first circuit and when energized connects P and T to the second circuit.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-61A |
| Series | 1 |
| Capacity | 5 gpm20 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 in³/min.@3000 psi80 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-461-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ