SUN HYDRAULICS
DODPCAN
$139.49 USD
- SUN HYDRAULICS
- Material:DODPCAN
- Model:DODP-CAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DODPCAN (DODPCAN) is a normally open, balanced poppet switching element designed for hydraulic systems requiring precise control and reliability. This component operates by maintaining an open position until pilot pressure at port 3 reaches a predetermined threshold set by the integral pilot relief stage, prompting the poppet to shift to a closed position. Its unique balanced construction allows for predictable switching performance at pressures up to 5000 psi (350 bar) at both port 1 and port 2. The valve is engineered to handle backpressure at the drain port, which directly affects the valve setting, and will reopen when pilot pressure drops below 145 psi (10 bar). Featuring hydraulic balance between ports 1 and 2, this valve ensures full sealing from ports 3 and 4, with positive sealing of these latter ports as well. It boasts an impressively low leakage rate between ports 1 and 2\u2014typically less than 10 drops per minute at maximum pressure\u2014making it highly efficient for demanding applications. The DODPCAN incorporates Sun's floating style construction, minimizing risks of internal part binding due to excessive installation torque or machining variations in cavity/cartridge setups. This model fits into a T21A cavity and belongs to Series 1 with a capacity of up to 15 gpm (60 L/min). It requires a minimum pilot pressure of 400 psi (28 bar) to shift the valve, while maintaining a maximum operating pressure of up to 5000 psi (350 bar). Installation specifics include a valve hex size of \\(7/8\\) inch (22.2 mm) with an installation torque range of 30-35 lbf ft (41-47 Nm), ensuring secure placement in hydraulic systems.
The Sun Hydraulics DODPCAN (DODPCAN) is a normally open, balanced poppet switching element designed for hydraulic systems requiring precise control and reliability. This component operates by maintaining an open position until pilot pressure at port 3 reaches a predetermined threshold set by the integral pilot relief stage, prompting the poppet to shift to a closed position. Its unique balanced construction allows for predictable switching performance at pressures up to 5000 psi (350 bar) at both port 1 and port 2. The valve is engineered to handle backpressure at the drain port, which directly affects the valve setting, and will reopen when pilot pressure drops below 145 psi (10 bar). Featuring hydraulic balance between ports 1 and 2, this valve ensures full sealing from ports 3 and 4, with positive sealing of these latter ports as well. It boasts an impressively low leakage rate between ports 1 and 2\u2014typically less than 10 drops per minute at maximum pressure\u2014making it highly efficient for demanding applications. The DODPCAN incorporates Sun's floating style construction, minimizing risks of internal part binding due to excessive installation torque or machining variations in cavity/cartridge setups. This model fits into a T21A cavity and belongs to Series 1 with a capacity of up to 15 gpm (60 L/min). It requires a minimum pilot pressure of 400 psi (28 bar) to shift the valve, while maintaining a maximum operating pressure of up to 5000 psi (350 bar). Installation specifics include a valve hex size of \\(7/8\\) inch (22.2 mm) with an installation torque range of 30-35 lbf ft (41-47 Nm), ensuring secure placement in hydraulic systems.
This is a normally open, balanced poppet, switching element. When pilot pressure is applied to port 3, the poppet remains open until the pilot pressure reaches the setting established by the integral pilot relief stage, at which point the poppet shifts to the closed position.
- Unique balanced construction provides predictable switching with 5000 psi (350 bar) at both port 1 and port 2. When the remote pressure signal at port 3 exceeds the internal valve setting, the valve shifts to the closed position.
- Any backpressure at the drain port is directly additive to the valve setting.
- Valve will open when the pilot pressure falls below 145 psi (10 bar).
- These valves are hydraulically balanced between port 1 and port 2.
- Port 1 and port 2 are fully sealed from port 3 and port 4. Ports 3 and 4 are positively sealed.
- Leakage rate between port 1 and port 2 is very low, typically less than 10 drops/min. at 5000 psi (0,7 cc/min at 350 bar).
- All ports will accept 5000 psi (350 bar).
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-21A |
| Series | 1 |
| Capacity | 15 gpm60 L/min. |
| Minimum Pilot Pressure Required to Shift Valve | 400 psi28 bar |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | See Performance DataSee Performance Data |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Seal kit - Cartridge | Viton: 990-021-006 |
Show FAQ