SUN HYDRAULICS
DOJPCAV
$556.36 USD
- SUN HYDRAULICS
- Material:DOJPCAV
- Model:DOJP-CAV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DOJPCAV (DOJPCAV) is a normally open, balanced poppet, switching element designed for hydraulic applications where precise control and reliability are essential. This component features a unique balanced construction that ensures predictable switching under high pressure conditions, with the ability to handle 5000 psi (350 bar) at both port 1 and port 2. The valve operates by shifting to a closed position when the pilot pressure applied at port 3 exceeds the internal valve setting. It is engineered to maintain low leakage rates between port 1 and port 2, typically less than 10 drops per minute at maximum pressure. The DOJPCAV model provides full sealing between ports 1, 2, and ports 3, 4, ensuring no cross-contamination or unintended fluid transfer. The valve's design incorporates Sun's floating style construction to reduce the likelihood of internal part binding due to excessive installation torque or machining variations in the cavity/cartridge. With a capacity of up to 120 gpm (480 L/min), this switching element is suitable for high-flow applications. Installation of this valve requires specific torque settings: the valve hex size is 1-5/8 inches (41.3 mm), with an installation torque range of 350 - 375 lbf ft (475 - 508 Nm). The adjustment screw features an internal hex size of 5/32 inches (4 mm), while the locknut has a hex size of 9/16 inches (15 mm) and requires a torque setting of between 80 - 90 lbf in (9 -10 Nm). This model also comes with a Viton seal kit for reliable sealing performance in demanding environments.
The Sun Hydraulics DOJPCAV (DOJPCAV) is a normally open, balanced poppet, switching element designed for hydraulic applications where precise control and reliability are essential. This component features a unique balanced construction that ensures predictable switching under high pressure conditions, with the ability to handle 5000 psi (350 bar) at both port 1 and port 2. The valve operates by shifting to a closed position when the pilot pressure applied at port 3 exceeds the internal valve setting. It is engineered to maintain low leakage rates between port 1 and port 2, typically less than 10 drops per minute at maximum pressure. The DOJPCAV model provides full sealing between ports 1, 2, and ports 3, 4, ensuring no cross-contamination or unintended fluid transfer. The valve's design incorporates Sun's floating style construction to reduce the likelihood of internal part binding due to excessive installation torque or machining variations in the cavity/cartridge. With a capacity of up to 120 gpm (480 L/min), this switching element is suitable for high-flow applications. Installation of this valve requires specific torque settings: the valve hex size is 1-5/8 inches (41.3 mm), with an installation torque range of 350 - 375 lbf ft (475 - 508 Nm). The adjustment screw features an internal hex size of 5/32 inches (4 mm), while the locknut has a hex size of 9/16 inches (15 mm) and requires a torque setting of between 80 - 90 lbf in (9 -10 Nm). This model also comes with a Viton seal kit for reliable sealing performance in demanding environments.
This is a normally open, balanced poppet, switching element. When pilot pressure is applied to port 3, the poppet remains open until the pilot pressure reaches the setting established by the integral pilot relief stage, at which point the poppet shifts to the closed position.
- Unique balanced construction provides predictable switching with 5000 psi (350 bar) at both port 1 and port 2. When the remote pressure signal at port 3 exceeds the internal valve setting, the valve shifts to the closed position.
- Any backpressure at the drain port is directly additive to the valve setting.
- These valves are hydraulically balanced between port 1 and port 2.
- Port 1 and port 2 are fully sealed from port 3 and port 4. Ports 3 and 4 are positively sealed.
- Leakage rate between port 1 and port 2 is very low, typically less than 10 drops/min. at 5000 psi (0,7 cc/min at 350 bar).
- Valve will open when the pilot pressure falls below 145 psi (10 bar).
- All ports will accept 5000 psi (350 bar).
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-24A |
| Series | 4 |
| Capacity | 120 gpm480 L/min. |
| Minimum Pilot Pressure Required to Shift Valve | 300 psi20 bar |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | See Performance DataSee Performance Data |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Valve Hex Size | 1 5/8 in.41,3 mm |
| Valve Installation Torque | 350 - 375 lbf ft475 - 508 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Seal kit - Cartridge | Viton: 990-024-006 |
Show FAQ