SUN HYDRAULICS
DOJPCBN
$547.43 USD
- SUN HYDRAULICS
- Material:DOJPCBN
- Model:DOJP-CBN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DOJPCBN (DOJPCBN) is a normally open, balanced poppet switching element designed for hydraulic systems requiring precise control under high pressure. This component features a unique balanced construction that ensures predictable switching at pressures up to 5000 psi (350 bar) at both port 1 and port 2. The valve remains open until the pilot pressure at port 3 exceeds the setting established by the integral pilot relief stage, prompting the poppet to shift to a closed position. Notably, any backpressure at the drain port is directly additive to the valve setting, enhancing its reliability in maintaining desired pressure levels. The DOJPCBN model is hydraulically balanced between ports 1 and 2, with these ports fully sealed from ports 3 and 4, ensuring minimal leakage\u2014typically less than 10 drops per minute at maximum pressure. It incorporates Sun Hydraulics' floating style construction to minimize potential binding of internal parts due to installation torque or machining variations. The valve requires a minimum pilot pressure of 300 psi (20 bar) to shift and can handle a maximum operating pressure of up to 5000 psi (350 bar). This cartridge valve fits into a T-24A cavity and offers a substantial flow capacity of up to 120 gpm (480 L/min). For installation, it requires specific torque settings: a valve installation torque between 350-375 lbf ft (475-508 Nm), an adjustment screw with an internal hex size of 5/32 inch (4 mm), and a locknut torque ranging from 80-90 lbf in. (9-10 Nm). Additionally, it uses Viton seal kits for optimal performance under various conditions.
The Sun Hydraulics DOJPCBN (DOJPCBN) is a normally open, balanced poppet switching element designed for hydraulic systems requiring precise control under high pressure. This component features a unique balanced construction that ensures predictable switching at pressures up to 5000 psi (350 bar) at both port 1 and port 2. The valve remains open until the pilot pressure at port 3 exceeds the setting established by the integral pilot relief stage, prompting the poppet to shift to a closed position. Notably, any backpressure at the drain port is directly additive to the valve setting, enhancing its reliability in maintaining desired pressure levels. The DOJPCBN model is hydraulically balanced between ports 1 and 2, with these ports fully sealed from ports 3 and 4, ensuring minimal leakage\u2014typically less than 10 drops per minute at maximum pressure. It incorporates Sun Hydraulics' floating style construction to minimize potential binding of internal parts due to installation torque or machining variations. The valve requires a minimum pilot pressure of 300 psi (20 bar) to shift and can handle a maximum operating pressure of up to 5000 psi (350 bar). This cartridge valve fits into a T-24A cavity and offers a substantial flow capacity of up to 120 gpm (480 L/min). For installation, it requires specific torque settings: a valve installation torque between 350-375 lbf ft (475-508 Nm), an adjustment screw with an internal hex size of 5/32 inch (4 mm), and a locknut torque ranging from 80-90 lbf in. (9-10 Nm). Additionally, it uses Viton seal kits for optimal performance under various conditions.
This is a normally open, balanced poppet, switching element. When pilot pressure is applied to port 3, the poppet remains open until the pilot pressure reaches the setting established by the integral pilot relief stage, at which point the poppet shifts to the closed position.
- Unique balanced construction provides predictable switching with 5000 psi (350 bar) at both port 1 and port 2. When the remote pressure signal at port 3 exceeds the internal valve setting, the valve shifts to the closed position.
- Any backpressure at the drain port is directly additive to the valve setting.
- These valves are hydraulically balanced between port 1 and port 2.
- Port 1 and port 2 are fully sealed from port 3 and port 4. Ports 3 and 4 are positively sealed.
- Leakage rate between port 1 and port 2 is very low, typically less than 10 drops/min. at 5000 psi (0,7 cc/min at 350 bar).
- Valve will open when the pilot pressure falls below 145 psi (10 bar).
- All ports will accept 5000 psi (350 bar).
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-24A |
| Series | 4 |
| Capacity | 120 gpm480 L/min. |
| Minimum Pilot Pressure Required to Shift Valve | 300 psi20 bar |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | See Performance DataSee Performance Data |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Valve Hex Size | 1 5/8 in.41,3 mm |
| Valve Installation Torque | 350 - 375 lbf ft475 - 508 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Seal kit - Cartridge | Viton: 990-024-006 |
Show FAQ