SUN HYDRAULICS
DPBALCN
$99.98 USD
- SUN HYDRAULICS
- Material:DPBALCN
- Model:DPBA-LCN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPBALCN (DPBALCN) is a normally open, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile component can function independently or in conjunction with larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 3 surpasses a specified setting, with pressure at port 3 directly affecting this setting. However, port 3 may not be suitable as a work port due to its influence on the valve setting; in such cases, a 4-port version might be more appropriate. Both direct-acting and pilot-operated versions of these valves are interchangeable, sharing the same cavities and flow paths. The DPBALCN model features a maximum operating pressure of 5000 psi (350 bar) and a capacity of 7 gpm (28 L/min). It incorporates Sun's floating style construction to reduce internal part binding risks caused by excessive installation torque or machining variations. The maximum allowable pressure at port 3 is limited to 3000 psi (210 bar) due to fatigue strength limits rather than hydraulic operating constraints. The valve's control pilot flow ranges from 7 to 10 in\u00b3/min (0.11 to 0.16 L/min), with maximum leakage at standard viscosity being just 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). Adjustments can be made via an internal hex screw, requiring up to five full clockwise turns for increased settings. Installation requires specific torques: the valve itself needs between 30-35 lbf\u00b7ft (41-47 Nm), while the locknut demands between 80-90 lbf\u00b7in (9-10 Nm). This model weighs approximately .60 lb (0.30 kg) and uses Viton seals for reliability under various conditions.
The Sun Hydraulics DPBALCN (DPBALCN) is a normally open, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile component can function independently or in conjunction with larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 3 surpasses a specified setting, with pressure at port 3 directly affecting this setting. However, port 3 may not be suitable as a work port due to its influence on the valve setting; in such cases, a 4-port version might be more appropriate. Both direct-acting and pilot-operated versions of these valves are interchangeable, sharing the same cavities and flow paths. The DPBALCN model features a maximum operating pressure of 5000 psi (350 bar) and a capacity of 7 gpm (28 L/min). It incorporates Sun's floating style construction to reduce internal part binding risks caused by excessive installation torque or machining variations. The maximum allowable pressure at port 3 is limited to 3000 psi (210 bar) due to fatigue strength limits rather than hydraulic operating constraints. The valve's control pilot flow ranges from 7 to 10 in\u00b3/min (0.11 to 0.16 L/min), with maximum leakage at standard viscosity being just 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). Adjustments can be made via an internal hex screw, requiring up to five full clockwise turns for increased settings. Installation requires specific torques: the valve itself needs between 30-35 lbf\u00b7ft (41-47 Nm), while the locknut demands between 80-90 lbf\u00b7in (9-10 Nm). This model weighs approximately .60 lb (0.30 kg) and uses Viton seals for reliability under various conditions.
Normally open, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 7 - 10 in³/min.0,11 - 0,16 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-011-006 |
Show FAQ