SUN HYDRAULICS
DPBAOWN
$112.88 USD
- SUN HYDRAULICS
- Material:DPBAOWN
- Model:DPBA-OWN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPBAOWN (DPBAOWN) is a normally open, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile valve can function independently or be used to actuate larger pilot-operated directional cartridges or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 3 exceeds the pre-set threshold. Notably, pressure at port 3 directly influences the valve setting, which may limit its use as a work port in certain circuits. In such cases, a four-port version may be more suitable. This valve features interchangeable direct-acting and pilot-operated versions that fit the same cavities and have identical flow paths. It is not bistable but can modulate between two positions. The maximum allowable pressure at port 3 is limited to 3000 psi (210 bar) due to fatigue strength limits rather than hydraulic operating limits. When pilot pressure surpasses the valve setting, pilot flow becomes a consideration; if this poses an issue, opting for a direct-acting version might be beneficial. The DPBAOWN incorporates Sun's floating style construction to minimize internal part binding due to excessive installation torque or cavity/cartridge machining variations. It fits into cavity T-11A and belongs to Series 1 with a capacity of 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). The control pilot flow ranges from 7 to 10 in\u00b3/min (0.11 to 0.16 L/min), while maximum valve leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min/1000 psi (15 cc/min/70 bar). The valve's hex size is .78 inches (22.2 mm), with installation torque ranging from 30 to 35 lbf ft (41 to 47 Nm).
The Sun Hydraulics DPBAOWN (DPBAOWN) is a normally open, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile valve can function independently or be used to actuate larger pilot-operated directional cartridges or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 3 exceeds the pre-set threshold. Notably, pressure at port 3 directly influences the valve setting, which may limit its use as a work port in certain circuits. In such cases, a four-port version may be more suitable. This valve features interchangeable direct-acting and pilot-operated versions that fit the same cavities and have identical flow paths. It is not bistable but can modulate between two positions. The maximum allowable pressure at port 3 is limited to 3000 psi (210 bar) due to fatigue strength limits rather than hydraulic operating limits. When pilot pressure surpasses the valve setting, pilot flow becomes a consideration; if this poses an issue, opting for a direct-acting version might be beneficial. The DPBAOWN incorporates Sun's floating style construction to minimize internal part binding due to excessive installation torque or cavity/cartridge machining variations. It fits into cavity T-11A and belongs to Series 1 with a capacity of 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). The control pilot flow ranges from 7 to 10 in\u00b3/min (0.11 to 0.16 L/min), while maximum valve leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min/1000 psi (15 cc/min/70 bar). The valve's hex size is .78 inches (22.2 mm), with installation torque ranging from 30 to 35 lbf ft (41 to 47 Nm).
Normally open, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 7 - 10 in³/min.0,11 - 0,16 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-011-006 |
Show FAQ