SUN HYDRAULICS
DPBBCEN
$106.93 USD
- SUN HYDRAULICS
- Material:DPBBCEN
- Model:DPBB-CEN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPBBCEN (DPBBCEN) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This valve can function independently or be used to actuate larger pilot-operated directional or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 3 surpasses the set threshold. Notably, pressure at port 3 directly adds to the valve's setting, which may limit its use as a work port in certain circuits; a four-port version could be an alternative in such cases. The DPBBCEN is not bistable and can modulate between two positions. In scenarios where pilot pressure exceeds the valve setting, pilot flow becomes an important consideration\u2014performance curves should be consulted for pilot consumption versus load pressure above the valve setting. If this presents challenges, a direct-acting version may be preferable. This model incorporates Sun's floating style construction to reduce internal part binding due to excessive installation torque or cavity-cartridge machining variations. It fits T-11A cavities and belongs to Series 1 with a capacity of 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). The control pilot flow ranges from 7 to 10 in\u00b3/min (0.11 to 0.16 L/min), while maximum valve leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min/1000 psi (15 cc/min/70 bar). Adjustments require up to five clockwise turns, and installation torque specifications are between 30 to 35 lbf-ft (41 to 47 Nm). The valve weighs approximately .60 lb (.30 kg) and uses Viton seal kits for maintenance.
The Sun Hydraulics DPBBCEN (DPBBCEN) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This valve can function independently or be used to actuate larger pilot-operated directional or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 3 surpasses the set threshold. Notably, pressure at port 3 directly adds to the valve's setting, which may limit its use as a work port in certain circuits; a four-port version could be an alternative in such cases. The DPBBCEN is not bistable and can modulate between two positions. In scenarios where pilot pressure exceeds the valve setting, pilot flow becomes an important consideration\u2014performance curves should be consulted for pilot consumption versus load pressure above the valve setting. If this presents challenges, a direct-acting version may be preferable. This model incorporates Sun's floating style construction to reduce internal part binding due to excessive installation torque or cavity-cartridge machining variations. It fits T-11A cavities and belongs to Series 1 with a capacity of 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). The control pilot flow ranges from 7 to 10 in\u00b3/min (0.11 to 0.16 L/min), while maximum valve leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min/1000 psi (15 cc/min/70 bar). Adjustments require up to five clockwise turns, and installation torque specifications are between 30 to 35 lbf-ft (41 to 47 Nm). The valve weighs approximately .60 lb (.30 kg) and uses Viton seal kits for maintenance.
Normally closed, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 7 - 10 in³/min.0,11 - 0,16 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-011-006 |
Show FAQ