SUN HYDRAULICS
DPBBKAN
$110.90 USD
- SUN HYDRAULICS
- Material:DPBBKAN
- Model:DPBB-KAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPBBKAN (DPBBKAN) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile component can function independently or be used to actuate larger pilot-operated directional or logic cartridges. The valve shifts its position when the pressure differential between port 1 and port 3 surpasses a predefined setting, with pressure at port 3 being directly additive to this setting. This feature implies that port 3 may not be suitable as a work port in certain circuit configurations, prompting consideration of a 4-port version if necessary. Both direct-acting and pilot-operated versions share interchangeable characteristics, fitting the same cavities and maintaining identical flow paths. The DPBBKAN model exhibits non-bistable behavior, allowing modulation between two positions based on pilot pressure exceeding the valve setting. Its design incorporates Sun's floating style construction to reduce the risk of internal binding from excessive installation torque or machining variations in cavity/cartridge interfaces. The valve fits into a T11A cavity, belongs to Series 1, and has a capacity of 7 gpm (28 L/min). It operates at a maximum pressure of 5000 psi (350 bar) with factory settings established at 4 gpm (15 L/min). Control pilot flow ranges from 7 to 10 in\u00b3/min (0.11 to 0.16 L/min), while maximum valve leakage is limited to 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). Additional specifications include an adjustment screw internal hex size of 5/32 inch (4 mm), locknut hex size of 9/16 inch (15 mm), and model weight of .60 lb (0.30 kg). The valve requires an installation torque between 30 and 35 lbf ft (41 and 47 Nm) with locknut torque ranging from 80 to 90 lbf in (9 to10 Nm).
The Sun Hydraulics DPBBKAN (DPBBKAN) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile component can function independently or be used to actuate larger pilot-operated directional or logic cartridges. The valve shifts its position when the pressure differential between port 1 and port 3 surpasses a predefined setting, with pressure at port 3 being directly additive to this setting. This feature implies that port 3 may not be suitable as a work port in certain circuit configurations, prompting consideration of a 4-port version if necessary. Both direct-acting and pilot-operated versions share interchangeable characteristics, fitting the same cavities and maintaining identical flow paths. The DPBBKAN model exhibits non-bistable behavior, allowing modulation between two positions based on pilot pressure exceeding the valve setting. Its design incorporates Sun's floating style construction to reduce the risk of internal binding from excessive installation torque or machining variations in cavity/cartridge interfaces. The valve fits into a T11A cavity, belongs to Series 1, and has a capacity of 7 gpm (28 L/min). It operates at a maximum pressure of 5000 psi (350 bar) with factory settings established at 4 gpm (15 L/min). Control pilot flow ranges from 7 to 10 in\u00b3/min (0.11 to 0.16 L/min), while maximum valve leakage is limited to 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). Additional specifications include an adjustment screw internal hex size of 5/32 inch (4 mm), locknut hex size of 9/16 inch (15 mm), and model weight of .60 lb (0.30 kg). The valve requires an installation torque between 30 and 35 lbf ft (41 and 47 Nm) with locknut torque ranging from 80 to 90 lbf in (9 to10 Nm).
Normally closed, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 7 - 10 in³/min.0,11 - 0,16 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-011-006 |
Show FAQ