SUN HYDRAULICS
DPBDLWN
$112.78 USD
- SUN HYDRAULICS
- Material:DPBDLWN
- Model:DPBD-LWN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPBDLWN (DPBDLWN) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. It allows port 1 to 2 open with port 3 blocked and can be used independently or to actuate larger pilot-operated directional or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 surpasses the set threshold, with pressure at port 3 directly adding to this setting. Consequently, using port 3 as a work port may not be feasible unless opting for the 4-port version of this valve. Both direct-acting and pilot-operated versions are interchangeable, fitting the same cavities and maintaining identical flow paths. Port 3 can be blocked to prevent shifting, and while not bistable, it can modulate between two positions based on pilot pressure exceeding the valve setting. Pilot flow may become a consideration in such scenarios; if problematic, the direct acting version could be a viable alternative. The valve features Sun\u2019s floating style construction to reduce internal part binding due to excessive installation torque or machining variations. The DPBDLWN fits into cavity T-11A, belongs to series 1, and has a capacity of up to 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). Control pilot flow ranges from 7-10 in\u00b3/min (0.11-0.16 L/min), and maximum valve leakage is limited to 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). The adjustment requires up to five clockwise turns for increased setting, with specific hex sizes for installation torque and locknut adjustments provided for ease of installation.
The Sun Hydraulics DPBDLWN (DPBDLWN) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. It allows port 1 to 2 open with port 3 blocked and can be used independently or to actuate larger pilot-operated directional or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 surpasses the set threshold, with pressure at port 3 directly adding to this setting. Consequently, using port 3 as a work port may not be feasible unless opting for the 4-port version of this valve. Both direct-acting and pilot-operated versions are interchangeable, fitting the same cavities and maintaining identical flow paths. Port 3 can be blocked to prevent shifting, and while not bistable, it can modulate between two positions based on pilot pressure exceeding the valve setting. Pilot flow may become a consideration in such scenarios; if problematic, the direct acting version could be a viable alternative. The valve features Sun\u2019s floating style construction to reduce internal part binding due to excessive installation torque or machining variations. The DPBDLWN fits into cavity T-11A, belongs to series 1, and has a capacity of up to 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). Control pilot flow ranges from 7-10 in\u00b3/min (0.11-0.16 L/min), and maximum valve leakage is limited to 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). The adjustment requires up to five clockwise turns for increased setting, with specific hex sizes for installation torque and locknut adjustments provided for ease of installation.
Pilot-operated, 3-way directional cartridges (1 to 2 open, 3 blocked) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Port 3 can be blocked to prevent the valve from shifting.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 7 - 10 in³/min.0,11 - 0,16 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-011-006 |
Show FAQ