SUN HYDRAULICS
DPBMCAV
$139.19 USD
- SUN HYDRAULICS
- Material:DPBMCAV
- Model:DPBM-CAV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPBMCAV (DPBMCAV) is a normally open, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile component can be utilized independently or to control larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 4 surpasses a predetermined setting. Port 4 can be blocked to maintain the valve's position, while port 3 serves as a work port with a maximum pressure limit of 3000 psi (210 bar) due to fatigue strength considerations. The DPBMCAV is not bistable and can modulate between two positions, making it suitable for applications requiring variable flow control. The valve incorporates Sun's floating style construction to reduce the risk of internal binding from excessive installation torque or machining variations. It fits into cavity T-21A and belongs to Series 1 with a capacity of 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of up to 5000 psi (350 bar). The control pilot flow ranges from 7 to 10 in\u00b3/min (0.11 to 0.16 L/min), and maximum leakage at standard conditions is limited to 1 in\u00b3/min (15 cc/min). Installation requires specific torques: valve installation torque is set between 30-35 lbf-ft (41-47 Nm), while locknut torque ranges from 80-90 lbf-in (9-10 Nm). The adjustment screw has an internal hex size of 5/32 in. (4 mm) for fine-tuning the valve settings through up to five clockwise turns. For maintenance, Viton seal kits are available under part number 990021006.
The Sun Hydraulics DPBMCAV (DPBMCAV) is a normally open, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile component can be utilized independently or to control larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 4 surpasses a predetermined setting. Port 4 can be blocked to maintain the valve's position, while port 3 serves as a work port with a maximum pressure limit of 3000 psi (210 bar) due to fatigue strength considerations. The DPBMCAV is not bistable and can modulate between two positions, making it suitable for applications requiring variable flow control. The valve incorporates Sun's floating style construction to reduce the risk of internal binding from excessive installation torque or machining variations. It fits into cavity T-21A and belongs to Series 1 with a capacity of 7 gpm (28 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of up to 5000 psi (350 bar). The control pilot flow ranges from 7 to 10 in\u00b3/min (0.11 to 0.16 L/min), and maximum leakage at standard conditions is limited to 1 in\u00b3/min (15 cc/min). Installation requires specific torques: valve installation torque is set between 30-35 lbf-ft (41-47 Nm), while locknut torque ranges from 80-90 lbf-in (9-10 Nm). The adjustment screw has an internal hex size of 5/32 in. (4 mm) for fine-tuning the valve settings through up to five clockwise turns. For maintenance, Viton seal kits are available under part number 990021006.
Normally open, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.
- Port 4 can be blocked to prevent the valve from shifting.
- Port 3 can be used as a work port.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Pressure at port 4 is directly additive to the setting of the valve.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-21A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 7 - 10 in³/min.0,11 - 0,16 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-021-006 |
Show FAQ