SUN HYDRAULICS
DPBOKJV
$160.93 USD
- SUN HYDRAULICS
- Material:DPBOKJV
- Model:DPBO-KJV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPBOKJV (DPBOKJV) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. It functions as a switching device with one port blocked and two ports open, suitable for standalone use or to actuate larger pilot-operated or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 4 exceeds the set threshold. Port 4 can be blocked to prevent shifting, while port 3 serves as a work port with a maximum pressure limit of 3000 psi (210 bar) due to fatigue strength considerations. The valve is capable of modulating between two positions and incorporates Sun's floating style construction to reduce the risk of internal binding from excessive installation torque or machining variations. This valve fits T21A cavities and belongs to Series 1, with a capacity of up to 7 gpm (28 L/min). Factory pressure settings are established at a flow rate of 4 gpm (15 L/min), and it can handle maximum operating pressures up to 5000 psi (350 bar). Control pilot flow ranges from 7 to 10 in\u00b3/min (0.11 to 0.16 L/min), while maximum leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). The adjustment mechanism allows for setting increases through clockwise turns, with a total of up to five turns available. Installation requires specific torque values: valve hex size is .78 inches (22.2 mm), with installation torque between 30-35 lbf\u00b7ft (41-47 Nm), adjustment screw internal hex size is .156 inches (4 mm), locknut hex size is .5625 inches (15 mm), and locknut torque ranges from 80-90 lbf\u00b7in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and utilizes Viton seal kits for cartridge sealing.
The Sun Hydraulics DPBOKJV (DPBOKJV) is a pilot-operated, 3-way directional cartridge valve designed for moderate flow circuits. It functions as a switching device with one port blocked and two ports open, suitable for standalone use or to actuate larger pilot-operated or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 4 exceeds the set threshold. Port 4 can be blocked to prevent shifting, while port 3 serves as a work port with a maximum pressure limit of 3000 psi (210 bar) due to fatigue strength considerations. The valve is capable of modulating between two positions and incorporates Sun's floating style construction to reduce the risk of internal binding from excessive installation torque or machining variations. This valve fits T21A cavities and belongs to Series 1, with a capacity of up to 7 gpm (28 L/min). Factory pressure settings are established at a flow rate of 4 gpm (15 L/min), and it can handle maximum operating pressures up to 5000 psi (350 bar). Control pilot flow ranges from 7 to 10 in\u00b3/min (0.11 to 0.16 L/min), while maximum leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). The adjustment mechanism allows for setting increases through clockwise turns, with a total of up to five turns available. Installation requires specific torque values: valve hex size is .78 inches (22.2 mm), with installation torque between 30-35 lbf\u00b7ft (41-47 Nm), adjustment screw internal hex size is .156 inches (4 mm), locknut hex size is .5625 inches (15 mm), and locknut torque ranges from 80-90 lbf\u00b7in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and utilizes Viton seal kits for cartridge sealing.
Pilot-operated, 3-way directional cartridges (1 blocked, 2 to 3 open) are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 4 exceeds the setting.
- Port 4 can be blocked to prevent the valve from shifting.
- Port 3 can be used as a work port.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- Pressure at port 4 is directly additive to the setting of the valve.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-21A |
| Series | 1 |
| Capacity | 7 gpm28 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 7 - 10 in³/min.0,11 - 0,16 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-021-006 |
Show FAQ