SUN HYDRAULICS
DPCAKCN
$139.29 USD
- SUN HYDRAULICS
- Material:DPCAKCN
- Model:DPCA-KCN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPCAKCN (DPCAKCN) is a normally open, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile component can function independently or in conjunction with larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 3 surpasses a predetermined setting. It is important to note that pressure at port 3 directly influences the valve's setting, which may limit its use as a work port in certain circuits. For such applications, a 4-port version may be more suitable. This valve features interchangeable direct-acting and pilot-operated versions, sharing the same cavities and flow paths. It is capable of modulating between two positions rather than being bistable. The maximum pressure at port 3 should not exceed 3000 psi (210 bar) due to fatigue strength limits. When pilot pressure exceeds the set value, pilot flow considerations arise; performance curves provide guidance on this aspect. The DPCAKCN incorporates Sun's floating style construction to minimize internal part binding due to excessive installation torque or machining variations in cavity/cartridge interfaces. It fits cavity T-2A, belongs to series 2, and has a capacity of 15 gpm (60 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). Control pilot flow ranges from 10 to 15 in\u00b3/min (0.16 to 0.25 L/min), while maximum valve leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). The valve features an adjustment screw with an internal hex size of 5/32 inches (4 mm) and requires up to five clockwise turns for setting adjustments. Installation torque specifications are between 45-50 lbf-ft (61-68 Nm), with a locknut hex size of 9/16 inches (15 mm) and torque range of 80-90 lbf-in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and utilizes Viton seal kits for cartridge sealing needs.
The Sun Hydraulics DPCAKCN (DPCAKCN) is a normally open, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile component can function independently or in conjunction with larger pilot-operated directional or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 3 surpasses a predetermined setting. It is important to note that pressure at port 3 directly influences the valve's setting, which may limit its use as a work port in certain circuits. For such applications, a 4-port version may be more suitable. This valve features interchangeable direct-acting and pilot-operated versions, sharing the same cavities and flow paths. It is capable of modulating between two positions rather than being bistable. The maximum pressure at port 3 should not exceed 3000 psi (210 bar) due to fatigue strength limits. When pilot pressure exceeds the set value, pilot flow considerations arise; performance curves provide guidance on this aspect. The DPCAKCN incorporates Sun's floating style construction to minimize internal part binding due to excessive installation torque or machining variations in cavity/cartridge interfaces. It fits cavity T-2A, belongs to series 2, and has a capacity of 15 gpm (60 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). Control pilot flow ranges from 10 to 15 in\u00b3/min (0.16 to 0.25 L/min), while maximum valve leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). The valve features an adjustment screw with an internal hex size of 5/32 inches (4 mm) and requires up to five clockwise turns for setting adjustments. Installation torque specifications are between 45-50 lbf-ft (61-68 Nm), with a locknut hex size of 9/16 inches (15 mm) and torque range of 80-90 lbf-in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and utilizes Viton seal kits for cartridge sealing needs.
Normally open, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ