SUN HYDRAULICS
DPCBCAN
$130.36 USD
- SUN HYDRAULICS
- Material:DPCBCAN
- Model:DPCB-CAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPCBCAN (Material Number: DPCBCAN) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile component can function independently or in conjunction with larger pilot-operated directional cartridges or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 3 surpasses the set threshold, with pressure at port 3 being directly additive to this setting. Users should note that maximum pressure at port 3 should not exceed 3000 psi (210 bar) due to fatigue strength limitations. With a cavity size of T-2A and a series designation of 2, this valve offers a capacity of up to 15 gpm (60 L/min) and is factory pressure set at 4 gpm (15 L/min). The maximum operating pressure is rated at 5000 psi (350 bar), while control pilot flow ranges between 10-15 in\u00b3/min (0.16-0.25 L/min). The valve features a minimal leakage rate of 1 in\u00b3/min at 1000 psi (approximately 15 cc/min at 70 bar) and allows for adjustment via clockwise turns to increase settings, using an internal hex size adjustment screw of \\(\\frac{5}{32}\\) inch (4 mm). It incorporates Sun's floating style construction to minimize internal binding risks due to installation torque or machining variations. The valve's hex size is \\(1 \\frac{1}{8}\\) inches (28.6 mm), requiring an installation torque between 45-50 lbf\u00b7ft (61-68 Nm). Additionally, it includes a locknut with a hex size of \\(\\frac{9}{16}\\) inch (15 mm), torqued between 80-90 lbf\u00b7in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and uses Viton seal kits for enhanced durability and performance.
The Sun Hydraulics DPCBCAN (Material Number: DPCBCAN) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. This versatile component can function independently or in conjunction with larger pilot-operated directional cartridges or logic cartridges. It operates by shifting when the pressure differential between port 1 and port 3 surpasses the set threshold, with pressure at port 3 being directly additive to this setting. Users should note that maximum pressure at port 3 should not exceed 3000 psi (210 bar) due to fatigue strength limitations. With a cavity size of T-2A and a series designation of 2, this valve offers a capacity of up to 15 gpm (60 L/min) and is factory pressure set at 4 gpm (15 L/min). The maximum operating pressure is rated at 5000 psi (350 bar), while control pilot flow ranges between 10-15 in\u00b3/min (0.16-0.25 L/min). The valve features a minimal leakage rate of 1 in\u00b3/min at 1000 psi (approximately 15 cc/min at 70 bar) and allows for adjustment via clockwise turns to increase settings, using an internal hex size adjustment screw of \\(\\frac{5}{32}\\) inch (4 mm). It incorporates Sun's floating style construction to minimize internal binding risks due to installation torque or machining variations. The valve's hex size is \\(1 \\frac{1}{8}\\) inches (28.6 mm), requiring an installation torque between 45-50 lbf\u00b7ft (61-68 Nm). Additionally, it includes a locknut with a hex size of \\(\\frac{9}{16}\\) inch (15 mm), torqued between 80-90 lbf\u00b7in (9-10 Nm). The model weighs approximately .60 lb (.30 kg) and uses Viton seal kits for enhanced durability and performance.
Normally closed, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ