SUN HYDRAULICS
DPCBOBN
$138.30 USD
- SUN HYDRAULICS
- Material:DPCBOBN
- Model:DPCB-OBN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPCBOBN (DPCBOBN) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. It can function independently or be used to actuate larger pilot-operated directional cartridges or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 3 surpasses its set threshold. Notably, pressure at port 3 directly adds to the valve's setting, which may limit its use as a work port in certain circuits; in such cases, a 4-port version might be preferable. This valve is not bistable and can modulate between two positions. It features Sun's floating style construction to reduce the risk of internal parts binding due to excessive installation torque or machining variations. The DPCBOBN is compatible with the T-2A cavity and belongs to series 2 with a capacity of 15 gpm (60 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). The control pilot flow ranges from 10 to 15 in\u00b3/min (0.16 to 0.25 L/min), while maximum valve leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min/1000 psi (15 cc/min/70 bar). The valve's adjustment feature allows for up to five clockwise turns to increase settings. Installation requires a torque of 45\u201350 lbf ft (61\u201368 Nm), and the model weighs approximately .60 lb (.30 kg). For maintenance, Viton seal kits are available under part number 990202006.
The Sun Hydraulics DPCBOBN (DPCBOBN) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. It can function independently or be used to actuate larger pilot-operated directional cartridges or logic cartridges. The valve operates by shifting when the pressure differential between port 1 and port 3 surpasses its set threshold. Notably, pressure at port 3 directly adds to the valve's setting, which may limit its use as a work port in certain circuits; in such cases, a 4-port version might be preferable. This valve is not bistable and can modulate between two positions. It features Sun's floating style construction to reduce the risk of internal parts binding due to excessive installation torque or machining variations. The DPCBOBN is compatible with the T-2A cavity and belongs to series 2 with a capacity of 15 gpm (60 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). The control pilot flow ranges from 10 to 15 in\u00b3/min (0.16 to 0.25 L/min), while maximum valve leakage at 110 SUS (24 cSt) is limited to 1 in\u00b3/min/1000 psi (15 cc/min/70 bar). The valve's adjustment feature allows for up to five clockwise turns to increase settings. Installation requires a torque of 45\u201350 lbf ft (61\u201368 Nm), and the model weighs approximately .60 lb (.30 kg). For maintenance, Viton seal kits are available under part number 990202006.
Normally closed, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ