SUN HYDRAULICS
DPCBOCV
$149.22 USD
- SUN HYDRAULICS
- Material:DPCBOCV
- Model:DPCB-OCV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DPCBOCV (DPCBOCV) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. It serves as a switching device that can operate independently or be used to actuate larger pilot-operated directional or logic cartridges. This valve shifts when the pressure differential between port 1 and port 3 exceeds its set value, with pressure at port 3 directly affecting the valve's setting. Notably, port 3 may not be suitable as a work port due to this characteristic; however, a four-port version of the valve could address this issue. The DPCBOCV is interchangeable with direct-acting valves as they share cavity compatibility and flow paths. This valve is capable of modulating between two positions and should not be considered bistable. The maximum pressure at port 3 is limited to 3000 psi (210 bar) due to fatigue strength considerations rather than hydraulic limits. For applications where pilot pressure surpasses the valve setting, pilot flow may need attention\u2014performance curves provide insight into pilot consumption versus load pressure above the setting. If necessary, a direct-acting version could resolve such issues. The DPCBOCV incorporates Sun's floating style construction to minimize internal binding risks caused by excessive installation torque or machining variations in cavity/cartridge interfaces. It fits into cavity T2A and belongs to Series 2 with a capacity of up to 15 gpm (60 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). Control pilot flow ranges from 10-15 in\u00b3/min (.16-.25 L/min), and maximum leakage is limited to 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). The valve's design includes adjustable features for fine-tuning its performance according to specific circuit demands.
The Sun Hydraulics DPCBOCV (DPCBOCV) is a normally closed, pilot-operated, 2-way directional cartridge valve designed for moderate flow circuits. It serves as a switching device that can operate independently or be used to actuate larger pilot-operated directional or logic cartridges. This valve shifts when the pressure differential between port 1 and port 3 exceeds its set value, with pressure at port 3 directly affecting the valve's setting. Notably, port 3 may not be suitable as a work port due to this characteristic; however, a four-port version of the valve could address this issue. The DPCBOCV is interchangeable with direct-acting valves as they share cavity compatibility and flow paths. This valve is capable of modulating between two positions and should not be considered bistable. The maximum pressure at port 3 is limited to 3000 psi (210 bar) due to fatigue strength considerations rather than hydraulic limits. For applications where pilot pressure surpasses the valve setting, pilot flow may need attention\u2014performance curves provide insight into pilot consumption versus load pressure above the setting. If necessary, a direct-acting version could resolve such issues. The DPCBOCV incorporates Sun's floating style construction to minimize internal binding risks caused by excessive installation torque or machining variations in cavity/cartridge interfaces. It fits into cavity T2A and belongs to Series 2 with a capacity of up to 15 gpm (60 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar). Control pilot flow ranges from 10-15 in\u00b3/min (.16-.25 L/min), and maximum leakage is limited to 1 in\u00b3/min at 1000 psi (15 cc/min at 70 bar). The valve's design includes adjustable features for fine-tuning its performance according to specific circuit demands.
Normally closed, pilot-operated, 2-way directional cartridges are switching devices typically used in moderate flow circuits. They can be used by themselves or to actuate larger pilot-operated directional cartridges or logic cartridges. The valve shifts when the pressure differential between port 1 and port 3 exceeds the setting.
- Pressure at port 3 is directly additive to the setting of the valve. Because of this, port 3 may not be useable as a work port in your circuit. If this is a consideration, the 4 port version of this valve may be a solution.
- Direct-acting and pilot-operated versions of these valves are interchangeable. They fit the same cavities and have the same flow paths.
- This valve is not bistable; it is capable of modulating between the two positions shown.
- Maximum pressure at port 3 should be limited to 3000 psi (210 bar). This is due to fatigue strength limits not hydraulic operating limits.
- When pilot pressure exceeds the valve setting, pilot flow may be a consideration. See performance curves for pilot consumption vs. load pressure above the valve setting. If this is a problem, the direct acting version of this valve would be a solution.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 15 gpm60 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 in³/min.@1000 psi15 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ